CAS Number 111974-72-2, Quetiapine Fumarate IP BP Ph Eur EP USP Grade Manufacturers Exporters

Home ------ Contact Anmol Chemicals Industries

Chemical Exporter Air Cargo JarPacked Chemicals Pail for Chemicals Carboys Jumbo packing

Quetiapine Fumarate Manufacturers Exporters
CAS Number 111974-72-2, Quetiapine Fumarate IP BP Ph Eur EP USP Manufacturer Exporter

For Properties Specifications of Quetiapine Fumarate Click Properties, Specifications of Quetiapine Fumarate Manufacturer.

For Uses of Quetiapine Fumarate Click Uses of Quetiapine Fumarate Manufacturer.

For For SDS MSDS Sheet of Quetiapine Fumarate Click SDS Safety Data Sheet MSDS Sheet of Quetiapine Fumarate Manufacturer.

The Properties and Specifications of Quetiapine Fumarate:

Quetiapine Fumarate BP Ph Eur Grade:
C46H54N6O8S2 --- 883 CAS 111974-72-2
Action and use: Dopamine receptor antagonist; neuroleptic

DEFINITION
Bis[2-[2-[4-(dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl]ethoxy]ethanol] (2E)-but-2-enedioate.
Content:
— quetiapine fumarate (C46H54N6O8S2; Mr 883): 99.0 per cent to 101.0 per cent (dried substance);
— fumaric acid (C4H4O4; Mr 116.1): 12.5 per cent to 13.8 per cent (dried substance).

CHARACTERS
Appearance: White or almost white powder.
Solubility: Slightly soluble in water, in anhydrous ethanol and in methanol. It shows polymorphism.

IDENTIFICATION
Infrared absorption spectrophotometry
Related substances: Liquid chromatography.
Loss on drying: Maximum 0.5 per cent, determined on 1.000 g by drying in an oven at 105C.
Sulfated ash: Maximum 0.1 per cent, determined on 1.0 g.


Quetiapine Fumarate USP Grade Specifications:
C21H25N3O2S)2- C4H4O4 --- 883.09
Ethanol, 2-[2-(4-dibenzo[b,f][1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-, (E)-2-butenedioate (2:1) (salt);
2-[2-(4-Dibenzo[b,f][1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]ethanol fumarate (2:1) (salt).
CAS 111974-72-2
UNII: 2S3PL1B6UJ
UNII: BGL0JSY5SI

DEFINITION
Quetiapine Fumarate contains NLT 98.0% and NMT 102.0% of quetiapine fumarate [(C21H25N3O2S)2 · C4H4O4 ], calculated on the dried basis.

IDENTIFICATION
A
. Infrared Absorption.
B. The retention time of the major peak of the Sample solution corresponds to that of the Standard solution, as obtained in the Assay.
Residue on Ignition: NMT 0.1%
Organic Impurities: To pass the test by chromatography.
Loss on Drying: Dry at 105C to constant weight. NMT 0.5%


We also manufacture Quetiapine Fumarate Quetiapine Hemifumarate Salt EP IP BP Ph Eur USP Grade.


The Uses of Quetiapine Fumarate:

Quetiapine Fumarate is used to treat certain mental/mood disorders such as schizophrenia, bipolar disorder, sudden episodes of mania or depression associated with bipolar disorder.


The MSDS-SDS Hazard Statement of Quetiapine Fumarate:

Quetiapine Fumarate or Quetiapine Hemifumarate Salt SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
 19-Nov-24

1. Product Identification

Product Name/Synonyms: Quetiapine Fumarate or Quetiapine Hemifumarate Salt.
CAS No.: 111974-72-2
EINECS EC Number: 601-144-2
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, oral Category 4

Labeling according to Regulation (EC) No 1272/2008

GHS Label Elements
Harmful
Harmful

Signal Words: Warning

Hazard statements:
H302: Harmful if swallowed.

Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P270: Do not eat, drink or smoke when using this product.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P332+313: If skin irritation occurs: Get medical advice/attention.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313: If eye irritation persists: Get medical advice/ attention.

3. Composition/Information on Ingredients

Product Name/Synonyms: Quetiapine Fumarate or Quetiapine Hemifumarate Salt.
CAS No.: 111974-72-2
EINECS EC Number: 601-144-2

4. First Aid Measures

Inhalation: Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Keep person warm and quiet; get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person.
Skin Contact: Immediately flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention.

5. Fire Fighting Measures

Fire: It is not considered to be a fire hazard. However, it will burn at high temperature.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Avoid solid water jet as it can scatter the fire. Use water spray to cool fire-exposed containers.
Special hazards arising from the substance or mixture: Carbon oxides, Nitrogen oxides (NOx), Sulphur oxides, Fumes.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Use personal protective equipment. Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Pick up spills and place them in a suitable container for reclamation or disposal.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wear personal protective equipment. Avoid ingestion and inhalation. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Storage: Room temperature. 2C to 30C. Protected from light.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for this substance.
Personal Respirators (NIOSH Approved): Not expected to require personal respirator usage. For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: White to Almost white powder or crystals.
Odor: No data found.
Odor threshold: No data found.
pH: No data found.
Relative density: No data found.
Boiling Point: No data found.
Melting Point: 172C to 176C literature.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Soluble in Dimethylformamide.
Viscosity: No data found.

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: May produce oxides of nitrogen, sulfur, and carbon along with fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: Heat, flame, ignition sources, dusting, and incompatibles.

11. Toxicological Information

Toxicity Data: LD50 Oral Human: 70 mg/kg.
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Mutagenic Effects: No data found.
Reproductive Effects: No data found.
Developmental Effects: No data found.

12. Ecological Information

Environmental Fate: No data found.
Persistence and degradability: No data found.
Bioaccumulative potential: No data found.
Mobility in soil: No data found.
PBT and vPvB assessment: No data found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Follow all the pollution control laws.

14. Transport Information

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
Sea Transport IMDG/IMO: Not regulated.
Air Transport IATA/ICAO: Not regulated

15. Regulatory Information

USA:
SARA 311/312 Hazardous Categorization
: See section 2.
California Proposition 65: Not listed.

16. Other Information

DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.

Quetiapine Fumarate Suppliers
Quetiapine Fumarate Structure

CAS Number 111974-72-2, Quetiapine Fumarate Manufacturer Exporter

ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA

e-mail: info(At the rate i.e. @)anmol.org

Copyright. 24-nov-24

We manufacture:

Fumaric Acid

Melphalan

Octyldodecanol

Olanzapine

Oleic Acid

Oxcarbazepine

Oxyclozanide

Quetiapine Fumarate.