CAS Number 5333-42-6, Octyldodecanol USP NF BP Ph Eur Analytical Reagent FCC Food Grade Manufacturers Exporters
------ 
CAS Number 5333-42-6, Octyldodecanol Manufacturer Exporter
For Properties Specifications of Octyldodecanol Click Properties, Specifications of Octyldodecanol Manufacturer.
For Uses of Octyldodecanol Click Uses of Octyldodecanol Manufacturer.
For For SDS MSDS Sheet of Octyldodecanol Click SDS Safety Data Sheet MSDS Sheet of Octyldodecanol Manufacturer.
The Properties and Specifications of Octyldodecanol:
Octyldodecanol USP NF Grade
Octyldodecanol contains not less than 90.0 percent of 2-octyldodecanol, the remainder consisting chiefly of related alcohols.
Identification: The retention time of the major peak in the chromatogram of the Assay preparation corresponds to that of the major peak in the chromatogram of the System suitability solution, as obtained in the Assay.
Acid value: not more than 0.5.
Iodine value: not more than 8.
Hydroxyl value: between 175 and 190.
Saponification value: not more than 5.
Octyldodecanol BP Ph Eur Grade Specifications
Action and use: Excipient.
DEFINITION
Condensation product of saturated liquid fatty alcohols.
Content: Minimum 90 per cent of (2RS)-2-octyldodecan-1-ol (C20H42O; Mr 298.6), the remainder consisting mainly of related alcohols.
CHARACTERS
Appearance: Clear, colourless or yellowish, oily liquid.
Solubility: Practically insoluble in water, miscible with ethanol (96 per cent).
Relative density: About 0.840.
Refractive index: About 1.455.
IDENTIFICATION
A. Hydroxyl value (see Tests).
B. Thin-layer chromatography.
TESTS
Acidity or alkalinity: Mix 5.0 g thoroughly for 1 min with a mixture of 0.1 ml of bromothymol blue solution, 2 ml of heptane and 10 ml of water. If the aqueous layer is blue, not more than 0.15 ml of 0.01 M hydrochloric acid is required to change the colour of the indicator to yellow. If the aqueous layer is yellow, add 0.45 ml of 0.01 M sodium hydroxide and shake vigorously. After standing to ensure complete separation, the aqueous layer is blue.
Optical rotation: - 0.10° to + 0.10°.
Hydroxyl value: 175 to 190.
Iodine value: Maximum 8.0.
Peroxide value: Maximum 5.0.
Saponification value: Maximum 5.0.
Heavy metals: Maximum 10 ppm.
Water: Maximum 0.5 per cent, determined on 2.00 g.
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
The Uses of Octyldodecanol:
Octyldodecanol is used to reduce foaming in liquid formulas like makeup removers or foundations. Octyldodecanol is often used in oil based formulas and helps keep ingredients from separating in lip sticks, lip gloss, lip balms and skincare. It is used to improve the texture of cosmetic products. It has amazing solvent properties.
The MSDS-SDS Hazard Statement of Octyldodecanol:
Octyldodecanol SDS Safety Data Sheet
MSDS SHEET, MATERIAL SAFETY DATA SHEET 15-Jan-23
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name & Other Names: Octyldodecanol
CAS Number: 5333-42-6
EINECS EC Number: 226-242-9
Molecular Formula: CH3(CH2)9CH[(CH2)7CH3]CH2OH
Molecular Weight: 298.55
Relevant uses and uses advised against (if any): Industrial use only.
2. HAZARDS IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Product Name & Other Names: Octyldodecanol
CAS Number: 5333-42-6
EINECS EC Number: 226-242-9
4. FIRST-AID MEASURES
Always seek medical attention after first aid measures are provided.
Eye contact: Rinse immediately with plenty of water for 10 minutes at least. Contact a physician if symptoms persist.
Skin contact: Wash thoroughly with soap and water; flush with plenty of water. Take off spoilt clothes. Contact physician if symptoms persist.
Ingestion: Wash the mouth with water; seek medical advice immediately.
Inhalation: Remove from exposure site to fresh air and keep at rest. Obtain medical advice.
5. FIRE-FIGHTING MEASURES
Extinguishing media recommended: Water spray, CO2, foam, dry chemicals.
Non-recommended: Do not use direct water jet on burning material.
Extinguishing procedures: Closed containers may build up pressure at elevated temperatures. If possible, containers should be cooled with a water spray.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.
7. HANDLING AND STORAGE
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray.Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, alkalis.
8. EXPOSURE CONTROL
Respiratory protection: Avoid to breath directly on the product. Apply local ventilations when appropriate.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear viscous liquid
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: around 0.84
Melting point/freezing point: -21C.
Initial boiling point and boiling range: 223C.
Flash point: 188C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.
10. STABILITY AND REACTIVITY
Reactivity: It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkalis, or oxidizing agents.
Decomposition: Carbon monoxide and unidentified organic compounds may be formed during combustion.
11. TOXICOLOGICAL INFORMATION
LD 50 ORAL/RAT (mg/Kg) >42.33
LD 50 DERMAL/RABBIT (mg/Kg) >1.68
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. ECOLOGICAL INFORMATION
Toxicity to fish: static test LC50 - Leuciscus idus (Golden orfe) - 3,000 - 10,000 mg/l - 48 h
Toxicity to algae: static test EC50 - Desmodesmus subspicatus (Scenedesmus subspicatus) - >100 mg/l - 72 h
Persistence and Degradability: Biodegradable.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
13. DISPOSAL CONSIDERATIONS
In accordance with local environmental laws. Avoid disposing into drainage systems and into the environment.
14. TRANSPORT REGULATIONS
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA: Not controlled.
15. REGULATORY INFORMATION
USA:
SARA 311/312 Hazardous chemical: Not applicable.
California Prop. 65 Components: Not listed.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Octyldodecanol Structure
CAS Number 5333-42-6, Octyldodecanol Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 19-nov-24
We manufacture: