CAS Number 544-63-8, Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid USP NF FCC Food Grade Manufacturers Exporters
------ 
CAS Number 544-63-8, Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Manufacturer Exporter
For Properties Specifications of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Click Properties, Specifications of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Manufacturer.
For Uses of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Click Uses of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Manufacturer.
For For SDS MSDS Sheet of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Click SDS Safety Data Sheet MSDS Sheet of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Manufacturer.
The Properties and Specifications of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid:
Specifications of Myristic Acid USP NF Grade:
C14H28O2 --- 228.37
Tetradecanoic acid;
1-Tetradecanoic acid;
1-Tridecanecarboxylic acid --- CAS 544-63-8
DEFINITION
Myristic Acid is obtained from coconut oil and other fats. It contains NLT 97.0% of myristic acid (C14H28O2 ).
IDENTIFICATION
A. Infrared Absorption: To pass the test.
ASSAY
Fats and Fixed Oils, Fatty Acid Composition: To pass the test.
Acceptance criteria: NLT 97.0%
Residue on Ignition: NMT 0.1%
Limit of Lead: To pass the test.
Acceptance criteria: NMT 2 ppm
Limit of Mineral Acids:
Sample: 5 g of melted Myristic Acid
Analysis: Shake the Sample with an equal volume of hot water for 2 min, cool, and filter.
Acceptance criteria: ;The filtrate is not reddened by the addition of 1 drop of methyl orange.
Congealing Temperature: 48C to 55.5C
Fats and Fixed Oils, Acid Value: 242 to 249
Fats and Fixed Oils, Iodine Value: NMT 1.0
Fats and Fixed Oils, Peroxide Value: NMT 10.0
Fats and Fixed Oils, Unsaponifiable Matter: NMT 1%
Water Determination: NMT 0.2%
Packaging and Storage: Preserve in well-closed containers. No storage requirements specified.
Specifications of Myristic Acid FCC Food Grade:
Tetradecanoic Acid
CH3(CH2)12COOH
C14H28O2 Formula weight: 228.37
CAS 544-63-8
DESCRIPTION
Myristic Acid occurs as a hard, white or faintly yellow, somewhat glossy, crystalline solid or as a white or yellow-white powder. It is obtained from coconut oil and other fats. Myristic Acid is practically insoluble in water, but it is soluble in alcohol, in chloroform, and in ether.
Function: Component in the manufacture of other food grade additives; defoaming agent.
Acid Value: Between 242 and 249.
Iodine Value: Not more than 1.0.
Lead: Not more than 2 mg/kg.
Residue on Ignition: Not more than 0.1%.
Saponification Value: Between 242 and 251.
Solidification Point: Between 48C and 55.5C.
Unsaponifiable Matter: Not more than 1%.
Water: Not more than 0.2%.
The Uses of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid:
Myristic acid has a wide range of uses in various industries and manufacturing processes. You can find it in foods and beverages, in which it is used as a flow agent and emulsifier. It is a surfactant in soaps, detergents and textiles, as well as an intermediate, internal or external lubricant in plastics. It is also used cosmetically as a skin moisturizer and as the base of some suntan creams. it is often used in South Asian cuisine for flavor. It has a variety of uses in the beauty industry, including as a: Fragrance Ingredient; Opacifying Agent; Surfactant; Cleansing Agent; and Emulsifier.
The MSDS-SDS Hazard Statement of Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid:
Myristic acid or Tetradecanoic acid SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 15-Jan-23
Section 1: Chemical Product and Company Identification
Product Name & Other Names: Myristic acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid.
CAS Number: 544-63-8
EINECS EC Code: 208-875-2 or 250-924-5
Molecular Formula: C14H28O2 or CH3(CH2)12COOH
Molecular Weight: 228.37
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling Regulation as per GHS & EC 1272/2008 (CLP) & GHS
GHS Label Elements NONE |
Signal Word: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Product Name & Other Names: Myristic acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid.
CAS Number: 544-63-8
EINECS EC Code: 208-875-2 or 250-924-5
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Section 5: Fire and Explosion Data
Flash point: >100C.
Flammability of the Product: Non-flammable. However, it will burn at high temperature.
Products of Combustion: Fumes and Oxides of Carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
Section 6: Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Do not inhale vapors, mist, or gas. Avoid dust formation. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc).
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, strong reducing agents, bases and acids. Storage temperature: -20C.
Section 8: Exposure Controls/Personal Protection
Occupational Exposure Limits: No exposure limits known for ingredient.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
Section 9: Physical and Chemical Properties
Physical state and appearance: White powder or flakes.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: around 0.9
Melting point/freezing point: 48C to 55C.
Initial boiling point and boiling range: 326C.
Flash point: >100C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in alcohol, methanol, ether, petroleum ether, benzene, chloroform.
Viscosity: Not available.
Section 10: Stability and Reactivity Data
Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials, heat flame
Incompatibility with various substances: Avoid high temperatures, sparks, open flames and moisture. Avoid contact with strong oxidizing agents, strong reducing agents, bases and acids.
Polymerization: Will not occur.
Section 11: Toxicological Information
LD50 Oral - Rat - > 10000 mg/kg.
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Section 12: Ecological Information
Toxicity to fish: LC50 Oryzias latipes (Orange-red killifish): 118 mg/l; 96 h.
Ecotoxicity: Not regarded as dangerous for the environment. However, large or frequent spills may have hazardous effects on the environment.
Persistence and Degradability: Not likely to persist.
Mobility: No information available.
Bioaccumulation/ Accumulation: Degradable.
Results of PBT and vPvB assessment: No data available for assessment.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Section 14: Transport Information
DOT USA, TDG Canada & ADR/RID Europe: controlled.
IMDG/IMO: Not controlled.
IATA: Not controlled.
Section 15: Other Regulatory Information
USA Regulations:
SARA 311/312 Hazard Categories: See section 2.
California Prop 65: Not listed.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Structure
CAS Number 544-63-8, Myristic Acid or Tetradecanoic acid or 1-Tridecanecarboxylic acid Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 1-feb-23
We manufacture: