CAS Number 617-48-1 and 6915-15-7, Malic Acid USP BP Ph Eur FCC Food Grade Manufacturers Exporters
------ 
CAS Number 617-48-1 and 6915-15-7, Malic Acid Manufacturer Exporter
For Properties Specifications of Malic Acid Click Properties, Specifications of Malic Acid Manufacturer.
For Uses of Malic Acid Click Uses of Malic Acid Manufacturer.
For For SDS MSDS Sheet of Malic Acid Click SDS Safety Data Sheet MSDS Sheet of Malic Acid Manufacturer.
The Properties and Specifications of Malic Acid:
Malic Acid USP Grade Specifications
C4H6O5 134.09
Hydroxybutanedioic acid, (±)-.
(±)-Malic acid.
(±)-Hydroxysuccinic acid CAS 617-48-1
Malic Acid contains not less than 99.0 percent and not more than 100.5 percent of C4H6O5.
Identification: Infrared Absorption 197K , on undried specimen.
Residue on ignition: not more than 0.1%.
Water-insoluble substances: Dissolve 25 g in 100 mL of water, filter the solution through a tared filtering crucible, wash the filter with hot water, and dry at 100 to constant weight: the increase in weight is not more than 25 mg (0.1%).
Heavy metals: 0.002%.
Fumaric and maleic acids: To pass the test. Not more than 1.0% of fumaric acid and not more than 0.05% of maleic acid are found.
Organic volatile impurities: meets the requirements.
Malic Acid BP Grade Ph Eur Grade Specifications
C4H6O5 --- 134.1 --- CAS 6915-15-7
DEFINITION
(2RS)-2-Hydroxybutanedioic acid.
Content: 99.0 per cent to 101.0 per cent (anhydrous substance).
CHARACTERS
Appearance: White or almost white, crystalline powder.
Solubility: Freely soluble in water and in alcohol, sparingly soluble in acetone.
IDENTIFICATION
A. Melting point: 128C to 132C.
B. Infrared absorption spectrophotometry.
TESTS
Solution S: Dissolve 5.00 g in water R and dilute to 25 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Optical rotation: - 0.10° to + 0.10°, determined on solution S.
Water-insoluble substances: Maximum 0.1 per cent.
Related substances
Liquid chromatography (2.2.29).
Limits: (Please see the original monograph)
impurity A: not more than twice the area of the corresponding peak in the chromatogram obtained with reference solution (b) (1.0 per cent);
impurity B: not more than 0.25 times the area of the corresponding peak in the chromatogram obtained with reference solution (b) (0.05 per cent);
any other impurity: for each impurity, not more than 0.5 times the area of the peak due to impurity B in the chromatogram obtained with reference solution (b) (0.1 per cent);
total of other impurities: not more than 2.5 times the area of the peak due to impurity B in the chromatogram obtained with reference solution (b) (0.5 per cent);
disregard limit: 0.1 times the area of the peak due to impurity B in the chromatogram obtained with reference solution (b) (0.02 per cent).
Heavy metals: Maximum 20 ppm.
Water: Maximum 2.0 per cent, determined on 1.00 g.
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
Malic Acid FCC Food Grade Specifications
DL-Malic Acid; Hydroxysuccinic Acid;
2-Hydroxybutanedioic Acid
C4H6O5 Formula weight 134.09
INS: 296 CAS 617-48-1
DESCRIPTION
Malic Acid occurs as a white or nearly white, crystalline powder or granules having a strongly acid taste. One gram dissolves in 0.8 mL of water and in 1.4 mL of alcohol. Its solutions are optically inactive. It melts at about 130C.
Function: Acidifier; flavoring agent.
REQUIREMENTS
Identification: The infrared absorption spectrum of a neat dispersion of the sample between two potassium bromide plates exhibits maxima only at the same wavelengths as those of a similar preparation of USP Malic Acid Reference Standard.
Assay: Not less than 99.0% and not more than 100.5% of C4H6O5.
Fumaric Acid: Not more than 1.0%.
Lead: Not more than 2 mg/kg.
Maleic Acid: Not more than 0.05%.
Optical (Specific) Rotation [α]25°/D: Between −0.10° and +0.10°.
Residue on Ignition: Not more than 0.1%.
Water-Insoluble Matter: Not more than 0.1%.
The Uses of Malic Acid:
People commonly use malic acid for dry mouth. It is also used for acne, fibromyalgia, fatigue, wrinkled skin, and many other conditions. Malic acid is a chief ingredient commonly used in anti-ageing creams and skincare essentials. It may be used to smooth wrinkles and fine lines, improve skin.It is used as a food additive. Malic Acid is used as a flavor enhancer in food preparation for confectionaries, beverages, fruit preparations and preserves, desserts, and bakery products. Malic acid is widely used in fruit and vegetable juices, carbonated soft drinks, jams, wines, and candies. It has been used as a common ingredient in many skin and hair care products.
The MSDS-SDS Hazard Statement of Malic Acid:
Malic Acid GHS SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 15-Jan-23
1. Product Identification
Product Name & Other Names: Malic Acid or DL-Hydroxysuccinic acid or DL Malic Acid or (±)-2-Hydroxysuccinic acid.
CAS No.: 6915-15-7, ( 617-48-1)
EINICS EC-No.: 230-022-8
Molecular Weight: 134.09
Chemical Formula: C4H6O5
Relevant uses and uses advised against (if any): Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, oral Category 4, H302
Skin corrosion/irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335
Labelling according to GHS and Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
Signal Words: Warning
Hazard statements:
H302: Harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P330: Rinse mouth.
P362: Take off contaminated clothing and wash before reuse.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P332+313: If skin irritation occurs: Get medical advice/attention.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Malic Acid or DL-Hydroxysuccinic acid or DL Malic Acid or (±)-2-Hydroxysuccinic acid.
CAS No.: 6915-15-7 (617-48-1)
EINICS EC-No.: 230-022-8
4. First Aid Measures
Always get medical attention after the first aid is over.
Inhalation: If Malic Acid is inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating as per law. Eliminate all ignition sources.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and bases. Avoid ignition sources and electrostatic discharge.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: Malic Acid is white to off-white crystals or powder.
Odor: Faint acidulous odor.
Odor threshold: Not available.
pH: Approximately 2, Acidic.
Relative density: around 1.6
Melting Point: 131 - 133 °C - lit.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: 340C
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Excessive heat, Strong oxidizers.
Conditions to Avoid: Heat, dusting and incompatibles.
11. Toxicological Information
Toxicity to Animals:
LD50 Oral - Rat - male and female - 3.500 mg/kg
LD50 Intraperitoneal - Rat - 100 mg/kg
LD50 Intraperitoneal - Mouse - 50 mg/kg
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. Ecological Information
Toxicity
Toxicity to daphnia and other aquatic invertebrates: Immobilization LC50 - Daphnia magna (Water flea) - ca. 240 mg/l - 48 h
Mobility in soil: Likely to be mobile due to solubility in water.
PBT & vPvB: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IATA: Not controlled.
IMDG/IMO: Not controlled.
15. Regulatory Information
USA:
SARA 311/312: See section 2.
California Proposition 65: This product does not contain any Proposition 65 chemicals.
16. Other Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Malic Acid Structure
CAS Number 617-48-1 and 6915-15-7, Malic Acid Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 25-nov-24
We manufacture: