CAS Number 73398-61-5, Medium-Chain Triglycerides or Caprylic Capric Triglyceride or MCT USP NF BP Ph Eur Grade Manufacturers Exporters
------ 
CAS Number 73398-61-5, Medium-Chain Triglycerides or Caprylic Capric Triglyceride or MCT USP NF BP Ph Eur Grade Manufacturer Exporter
For Properties Specifications of Medium-Chain Triglycerides or Caprylic Capric Triglyceride Click Properties, Specifications of Medium-Chain Triglycerides or Caprylic Capric Triglyceride Manufacturer.
For Uses of Medium-Chain Triglycerides or Caprylic Capric Triglyceride Click Uses of Medium-Chain Triglycerides or Caprylic Capric Triglyceride Manufacturer.
For For SDS MSDS Sheet of Medium-Chain Triglycerides or Caprylic Capric Triglyceride Click SDS Safety Data Sheet MSDS Sheet of Medium-Chain Triglycerides or Caprylic Capric Triglyceride Manufacturer.
The Properties and Specifications of Medium-Chain Triglycerides or Caprylic Capric Triglyceride:
Medium-chain Triglycerides BP Ph Eur Grade Specifications:
Medium Chain Triglyceride (MCT Oil)
Caprylic Capric Triglyceride (CCTG)
Glyceryl Tricaprylate/Caprate (GTCC)
Fractionated Coconut Oil
When Medium-chain Triglycerides are prepared from the endosperm of Cocos nucifera L the title fractionated coconut oil may be used.
Action and use: Excipient.
DEFINITION
Mixture of triglycerides of saturated fatty acids, mainly of caprylic (octanoic) acid and of capric (decanoic) acid. The fatty acids are obtained from the oil extracted from the hard, dried fraction of the endosperm of Cocos nucifera L. or from the dried endosperm of Elaeis guineensis Jacq.
Content: Minimum 95.0 per cent of saturated fatty acids with 8 and 10 carbon atoms.
CHARACTERS
Appearance: Colourless or slightly yellowish, oily liquid.
Solubility: Practically insoluble in water, miscible with ethanol (96 per cent), with methylene chloride, with light petroleum and with fatty oils.
Relative density: About 0.95.
Refractive index: About 1.446.
IDENTIFICATION
First identification: C, D
Second identification: A, B, D
A. Iodine value: maximum 1.0.
B. Saponification value: 310 to 360.
C. Composition of fatty acids (see Tests).
D. Viscosity (see Tests).
TESTS
Appearance: The substance to be examined is clear and not more intensely coloured than reference solution.
Alkaline impurities: Dissolve 2.00 g in a mixture of 1.5 mL of ethanol (96 per cent) and 3.0 mL of ether. Add 0.05 mL of bromophenol blue solution. Not more than 0.15 mL of 0.01 M hydrochloric acid is required to change the colour of the indicator to yellow.
Viscosity: 25 mPa-s to 33 mPa-s.
Acid value: Maximum 0.2.
Hydroxyl value: Maximum 10.
Peroxide value: Maximum 1.0.
Composition of fatty acids: To pass the test.
Composition of the fatty-acid fraction of the substance:
- caproic acid: maximum 2.0 per cent;
- caprylic acid: 50.0 per cent to 80.0 per cent;
- capric acid: 20.0 per cent to 50.0 per cent;
- lauric acid: maximum 3.0 per cent;
- myristic acid: maximum 1.0 per cent;
- fatty acids of chain length greater than or equal to C16: maximum 1.0 per cent.
Atomic absorption spectrometry: To pass the test.
Chromium: Maximum 0.05 ppm, if intended for use in parenteral nutrition.
Copper: Maximum 0.1 ppm, if intended for use in parenteral nutrition.
Lead: Maximum 0.1 ppm, if intended for use in parenteral nutrition.
Nickel: Maximum 0.2 ppm, if intended for use in parenteral nutrition.
Tin: Maximum 0.1 ppm, if intended for use in parenteral nutrition.
Water: Maximum 0.2 per cent, determined on 1.00 g.
Sulfated ash: Maximum 0.1 per cent, determined on 2.0 g.
The Uses of Medium-Chain Triglycerides or Caprylic Capric Triglyceride:
People use Medium-Chain Triglycerides or MCTs for involuntary weight loss called cachexia or wasting syndrome. MCTs are also used for obesity, seizures, athletic performance, Alzheimer
The MSDS-SDS Hazard Statement of Medium-Chain Triglycerides or Caprylic Capric Triglyceride:
Medium-chain Triglycerides MCT Oil Caprylic Capric Triglyceride CCTG Glyceryl Tricaprylate Caprate GTCC
SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 25-Nov-24
Section 1: Chemical Product and Company Identification
Product Name & Other Names: Medium-chain Triglycerides MCT Oil Caprylic Capric Triglyceride CCTG Glyceryl Tricaprylate Caprate GTCC.
CAS Number: 73398-61-5
EINECS EC Code: 277-452-2
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling as per GHS and Regulation EC 1272/2008 (CLP) & GHS
GHS Label Elements NONE |
Signal Word: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Product Name & Other Names: Medium-chain Triglycerides MCT Oil Caprylic Capric Triglyceride CCTG Glyceryl Tricaprylate Caprate GTCC.
CAS Number: 73398-61-5
EINECS EC Code: 277-452-2
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Products of Combustion: Oxides of Carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Avoid solid water jet as it can scatter the fire. Wear self-contained breathing apparatus for firefighting if necessary.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.
Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels low.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
Section 9: Physical and Chemical Properties
Physical state and appearance: Clear colorless, transparent, viscous liquid.
Odor: Mild, characteristic.
Odor threshold: No data found.
pH: No data found.
Relative density: around 0.93 – 0.96 literature.
Melting point: About 66C
Initial boiling point and boiling range: around 220C-230C literature.
Flash point: >230C.
Auto-ignition temperature: No data found.
Decomposition temperature: >300C literature.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Practically insoluble in water.
Viscosity: No data found.
Section 10: Stability and Reactivity Data
Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials, Moisture
Incompatibility with various substances: Avoid high temperatures, sparks, open flames, and moisture. Avoid contact with strong oxidizing agents.
Polymerization: Will not occur.
Section 11: Toxicological Information
LD50 Oral, Rat: > 5000 mg/kg.
LD50 Dermal, Rat: > 2000 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No data found.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.
Section 12: Ecological Information
Toxicity: EC50 > 100 mg/l (daphnia).
Persistence and Degradability: No data found.
Mobility: No data found.
Bioaccumulation/ Accumulation: Readily biodegradable. Expected to be unlikely to bioaccumulate.
Results of PBT and vPvB assessment: No data found for assessment.
The product is not classified as environmentally hazardous.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations. Follow all the pollution control rules.
Section 14: Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMDG/IMO: Not regulated.
IATA: Not regulated.
Section 15: Other Regulatory Information
USA Regulations:
California Prop 65: Not listed.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Medium-Chain Triglycerides or Caprylic Capric Triglyceride or MCT Structure
CAS Number 73398-61-5, Medium-Chain Triglycerides or Caprylic Capric Triglyceride Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 10-dec-24
We manufacture:
Medium-Chain Triglycerides or Caprylic Capric Triglyceride