CAS Number 35285-68-8, Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate BP Ph Eur Grade Manufacturers Exporters
CAS Number 35285-68-8, Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate Manufacturer ExporterFor Properties Specifications of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate Click Properties, Specifications of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate Manufacturer.
For Uses of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate Click Uses of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate Manufacturer.
For For SDS MSDS Sheet of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate Click SDS Safety Data Sheet MSDS Sheet of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate Manufacturer.
The Properties and Specifications of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate:
Ethyl Hydroxybenzoate Sodium BP Grade
Ethylparaben Sodium
Ethyl Parahydroxybenzoate Sodium, Ph Eur
C9H9NaO3 --- 188.2 --- CAS 35285-68-8DEFINITION
Sodium 4-(ethoxycarbonyl)phenolate.
Content: 99.0 per cent to 103.0 per cent (anhydrous substance).CHARACTERS
Appearance: White or almost white, hygroscopic, crystalline powder.
Solubility: Freely soluble in water, soluble in anhydrous ethanol, practically insoluble in methylene chloride.IDENTIFICATION
First identification A, B, E.
Second identification A, C, D, E.
A. Dissolve 0.5 g in 50 ml of water. Immediately add 5 ml of hydrochloric acid. Filter and wash the precipitate with water. Dry in vacuo at 80C for 2 h. It melts at 115C to 118C.
B. Infrared absorption spectrophotometry. Preparation:The precipitate obtained in identification A. Comparison ethyl parahydroxybenzoate CRS.
C. Examine the chromatograms obtained in the test for related substances.
Results:The principal spot in the chromatogram obtained with test solution (b) is similar in position and size to the principal spot in the chromatogram obtained with reference solution (c).
D. To about 10 mg in a test-tube add 1 ml of sodium carbonate solution, boil for 30 s and cool. Add 5 ml of aminopyrazolone solution and 1 ml of potassium ferricyanide solution and mix. An orange or red colour develops.
E. To 1 ml of solution S (see Tests) add 1 ml of water. The solution gives reaction (a) of sodium.TESTS
Solution S: Dissolve 5.0 g in carbon dioxide-free water prepared from distilled water and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S examined immediately after preparation is clear and not more intensely coloured than reference solution).
pH: 9.5 to 10.5. Dilute 1 ml of solution S to 100 ml with carbon dioxide-free water.
Related substances: Thin-layer chromatography (2.2.27). (0.5 per cent).
Chlorides: Maximum 350 ppm.
Sulphates: Maximum 300 ppm.
Heavy metals: Maximum 10 ppm.
Water: Maximum 5.0 per cent, determined on 0.500 g.
The Uses of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate:
Sodium Ethylparaben is used as an antifungal preservative. Sodium ethyl para-hydroxybenzoate, the sodium salt of ethylparaben is given the E number E215. A food preservative which prevents decomposition of food by preventing the growth of fungi or bacteria. Sodium ethyl p-hydroxybenzoate is widely used in food and pharmaceutical and textile industry for its antiseptic property. Sodium Ethylparaben is a water-soluble antiseptic mainly used as a safe, high efficiency, broad-spectrum antibiotic for cosmetics.
The MSDS-SDS Hazard Statement of Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate:
Sodium Ethyl Paraben or Sodium Ethyl Hydroxybenzoate SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 27-Jan-23SECTION 1. PRODUCT IDENTIFICATION
Product Name & Other Names: Sodium Ethylparaben, Sodium Ethyl Paraben or Sodium Ethyl Hydroxybenzoate.
CAS Number: 35285-68-8
EINECS EC Number: 252-487-6
Molecular Formula: C9H9NaO3
Molecular Weight: 188.2
Relevant uses and uses advised against (if any): Industrial Manufacturing.SECTION 2. HAZARDS IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Skin corrosion/irritation (Category 2), H315
Serious eye damage (Category 1), H318Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
CorrosiveSignal Words: Danger
Hazard statements:
H315: Causes skin irritation.
H318: Causes serious eye damage.Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS
Product Name & Other Names: Sodium Ethylparaben, Sodium Ethyl Paraben or Sodium Ethyl Hydroxybenzoate.
CAS Number: 35285-68-8
EINECS EC Number: 252-487-6SECTION 4. FIRST AID MEASURES
Always seek medical attention after first aid measures are provided.
Eye Contact: Do not allow victim to rub eye (s). Let the eye (s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid (s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye.
Skin Contact: Remove contaminated clothing, shoes, and leather goods (e.g. watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness or is unconscious or convulsing. Have victim rinse mouth thoroughly with water.SECTION 5. FIRE FIGHTING MEASURES
Fire and Explosion Hazards: Not considered flammable but may burn at high temperatures.
Extinguishing Media: Use means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Fire Fighting: Apart from oxides of carbon. toxic fumes may result from combustion. As with any fire, fire fighters should be fully trained and wear full protective clothing including an approved, self-contained breathing apparatus which supplies a positive air pressure within a full face-piece mask. Use water spray to cool unopened containers.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.SECTION 6. ACCIDENTAL RELEASE MEASURES
Procedures for Cleanup: Stop release if possible, to do so safely. Contain spill, isolate hazard area, and deny entry. Sweep up or vacuum. Place contaminated material in suitable, labeled containers for final disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
Personal Precautions: Gloves and coveralls or other protective clothing are recommended for persons responding to an accidental release. Close-fitting safety goggles may be necessary in some circumstances to prevent eye contact.
Environmental Precautions: This Contamination of soil and water should be prevented. Keep spillage from entering soil, streams, or sewers.SECTION 7. HANDLING AND STORAGE
Store in cool, dry, well-ventilated area away from incompatible substances. Protect from physical damage. Keep away from sources of ignition. Take measures to prevent the build-up of electrostatic charge. It is good practice to keep Sodium container closed when not in use. Avoid generating dust and the release of dust into the workplace. May form combustible dust concentrations in air. Use care during processing to minimize generation of dust. Good housekeeping is important to prevent accumulations of dust. Always practice good personal hygiene. Store at 15C to 25C.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: It is a white, odorless granules or powder.
Odor: None
Odor threshold: Not available.
pH: 10 @ 1 gm/l
Relative density: Not available.
Freezing/Melting Point/Range: >115C
Boiling Point: 297C (Decomposes)
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Soluble in water.
Viscosity: Not available.SECTION 10. STABILITY AND REACTIVITY
Stability and Reactivity: Stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur.
Incompatibilities: Oxidizing agents. Avoid excessive heat, spark, flame, ignition, and moisture.
Hazardous Decomposition Products: High temperature operations will generate carbon oxide and fumes.SECTION 11. TOXICOLOGICAL INFORMATION
Acute Toxicity (Oral LD50): > 2,000 mg/kg Rat
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.SECTION 12. ECOLOGICAL INFORMATION
Eco toxicological data: No data available. May cause long lasting harmful effects to aquatic life.
Biodegradability: No information available.
Mobility in soil: No information available.SECTION 13. DISPOSAL CONSIDERATIONS
Do not wash the material down drain. Put uncontaminated material back into the process if possible. Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
SECTION 14. TRANSPORT INFORMATION
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IATA: Not controlled
IMDG/IMO: Not controlled.SECTION 15. REGULATORY INFORMATION
USA Regulations:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: Not listed.SECTION 16 - ADDITIONAL INFORMATION
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate StructureCAS Number 35285-68-8, Sodium Ethylparaben Sodium Ethyl Paraben or Sodium ethyl p-hydroxybenzoate Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIAe-mail: info(At the rate i.e. @)anmol.org
Copyright. 25-nov-24
We manufacture:
Glacial Acetic Acid Manufacturer