CAS Number 35285-69-9, Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate USP NF BP Ph Eur Grade Manufacturers Exporters
------ 
CAS Number 35285-69-9, Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate Manufacturer Exporter
For Properties Specifications of Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate Click Properties, Specifications of Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate Manufacturer.
For Uses of Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate Click Uses of Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate Manufacturer.
For For SDS MSDS Sheet of Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate Click SDS Safety Data Sheet MSDS Sheet of aaa Manufacturer.
The Properties and Specifications of Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate:
Propylparaben Sodium USP NF Grade Specifications
Propylparaben Sodium contains not less than 98.5 percent and not more than 101.5 percent of C10H11NaO3, calculated on the anhydrous basis.
Completeness of solution: One g of it, dissolved in water, meets the requirement.
Identification:
A: Dissolve 0.5 g in 5 mL of water, acidify with hydrochloric acid, and filter the resulting precipitate. Wash the precipitate with water, and dry it over silica gel for 5 hours: the IR absorption spectrum of a mineral oil dispersion of it exhibits maxima only at the same wavelengths as that of a similar preparation of USP Propylparaben.
B: Ignite about 0.3 g, cool, and dissolve the residue in about 3 mL of 3 N hydrochloric acid. A platinum wire dipped in this solution imparts an intense, persistent yellow color to a nonluminous flame.
pH: between 9.5 and 10.5, in a solution (1 in 1000).
Water: not more than 5.0%.
Chloride: A 0.2-g portion shows no more chloride than corresponds to 0.10 mL of 0.020 N hydrochloric acid (0.035%).
Sulfate: A 0.25-g portion shows no more sulfate than corresponds to 0.30 mL of 0.020 N sulfuric acid (0.12%).
Sodium Propyl Hydroxybenzoate BP Ph Eur Grade Specifications
Sodium Propylparaben
Sodium Propyl Parahydroxybenzoate, Ph Eur
C10H11NaO3 --- 202.2 --- CAS 35285-69-9
Action and use: Antimicrobial preservative.
DEFINITION
Sodium propyl parahydroxybenzoate contains not less than 99.0 per cent and not more than the equivalent of 104.0 per cent of sodium 4-(propoxycarbonyl)phenolate, calculated with reference to the anhydrous substance.
CHARACTERS
A white or almost white, crystalline powder, freely soluble in water, sparingly soluble in alcohol, practically insoluble in methylene chloride.
IDENTIFICATION
First identification A, B, E.
Second identification A, C, D, E.
A. Dissolve 0.5 g in 50 ml of water. Immediately add 5 ml of hydrochloric acid. Filter, and wash the precipitate with water. Dry at 80C in vacuo for 2 h. The melting point of the precipitate is 96C to 99C.
B. Examine the precipitate obtained in identification test A by infrared absorption spectrophotometry, comparing with the spectrum obtained with propyl parahydroxybenzoate CRS.
C. Examine the chromatograms obtained in the test for related substances. The principal spot in the chromatogram obtained with test solution (b) is similar in position and size to the principal spot in the chromatogram obtained with reference solution (c).
D. To about 10 mg in a test-tube add 1 ml of sodium carbonate solution, boil for 30 s and cool. Add 5 ml of aminopyrazolone solution and 1 ml of potassium ferricyanide solution and mix. An orange to red colour develops.
E. To 1 ml of solution S (see Tests) add 1 ml of water. The solution gives reaction (a) of sodium.
TESTS
Solution S: Dissolve 5.0 g in carbon dioxide-free water prepared from distilled water, and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S, examined immediately after preparation, is clear and not more intensely coloured than reference solution.
pH: Dilute 1 ml of solution S to 100 ml with carbon dioxide-free water. The pH of the solution is 9.5 to 10.5.
Related substances: To pass the test.
Chlorides: To 10 ml of solution S add 30 ml of water and 1 ml of nitric acid and dilute to 50 ml with water. Shake and filter. Dilute 10 ml of the filtrate to 15 ml with water. The solution complies with the limit test for chlorides (350 ppm). Prepare the standard using 14 ml of chloride standard solution (5 ppm Cl) to which 1 ml of water has been added.
Sulphates: To 25 ml of solution S add 5 ml of distilled water and 10 ml of hydrochloric acid and dilute to 50 ml with distilled water. Shake and filter. Dilute 10 ml of the filtrate to 15 ml with distilled water. The solution complies with the limit test for sulphates (300 ppm).
Heavy metals: 2.0 g complies with limit test C for heavy metals (10 ppm). Prepare the standard using 2 ml of lead standard solution (10 ppm Pb).
Water: Not more than 5.0 per cent, determined on 0.500 g by the semi-micro determination of water.
The Uses of Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate:
Propylparaben has been used as an antimicrobial preservative in the food, cosmetic, and pharmaceutical industries. Common applications include the use of methyl and propyl parabens in the ratio of 2–3:1 in various food products. Its E number is E217.
The MSDS-SDS Hazard Statement of Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate:
Sodium Propylparaben, Sodium Propyl Paraben, Sodium Propyl hydroxybenzoate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. PRODUCT DESCRIPTION
Product Name & Other Names: Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl hydroxybenzoate.
CAS Number: 35285-69-9
EINECS EC Number: 252-488-1
Molecular Weight: 202.18
Molecular Formula: C10H11NaO3
Relevant uses and uses advised against (if any): Industrial Manufacturing.
2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements None |
Signal Words: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+ P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Product Name & Other Names: Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl hydroxybenzoate.
CAS Number: 35285-69-9
EINECS EC Number: 252-488-1
4. FIRST AID MEASURES
Always get medical attention after the first aid is over.
Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.
5. FIREFIGHTING PROCEDURES
Extinguisher Media: Use media suitable to extinguish surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Flammable Limits in Air % by Volume: N/A
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. SPILL OR LEAK PROCEDURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.
7. SPECIAL PRECAUTIONS
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.
8. SPECIAL PROTECTION INFORMATION
Exposure Guidelines: This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL DATA
Appearance: White to off-white powder.
Odor: odorless.
Odor threshold: Not available.
pH: 9-10
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Soluble.
Viscosity: Not available.
10. REACTIVITY DATA
Stability: It is stable
Conditions to Avoid: Heat, humidity, Dust generation.
Incompatibility (Materials to Avoid): Strong oxidizing agents, Extremes of temperature and direct sunlight.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide
Hazardous Polymerization: Will not occur.
11. TOXICITY DATA
Toxicity Data: LD50 Rat: LD50 Oral - Mouse - 3,700 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. ECOLOGICAL DATA
Toxicity to fish: Not available. May cause long lasting harmful effects to aquatic life.
Toxicity to fish: No information available.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: Not likely to bioaccumulate.
Results of PBT and vPvB assessment: No data available for assessment.
13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose in accordance with all applicable regulations.
14. TRANSPORT INFORMATION
DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMDG/IMO: Not regulated.
IATA: Not regulated.
15. REGULATORY INFORMATION
USA:
California Proposition 65: Not listed.
SARA 311/312 Hazards: See section 2.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate Structure
CAS Number 35285-69-9, Sodium Propylparaben or Sodium Propyl Paraben or Sodium Propyl Hydroxybenzoate Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 12-nov-24
We manufacture: