CAS Number ---, Sodium Sulfide Nonahydrate USP NF Analytical Reagent Grade Manufacturers Exporters
------ 
CAS Number ---, Sodium Sulfide Nonahydrate Manufacturer Exporter
For Properties Specifications of Sodium Sulfide Nonahydrate Click Properties, Specifications of Sodium Sulfide Nonahydrate Manufacturer.
For Uses of Sodium Sulfide Nonahydrate Click Uses of Sodium Sulfide Nonahydrate Manufacturer.
For For SDS MSDS Sheet of Sodium Sulfide Nonahydrate Click SDS Safety Data Sheet MSDS Sheet of Sodium Sulfide Nonahydrate Manufacturer.
The Properties and Specifications of Sodium Sulfide Nonahydrate:
Sodium Sulfide USP Grade Specifications
Na2S.9H2O 240.18
Sodium sulfide nonahydrate.
Disodium sulfide nonahydrate CAS 1313-84-4
Sodium Sulfide contains not less than 98.0 percent and not more than 103.0 percent of Na2S.9H2O.
Identification: [NOTE: Conduct this test in a fume hood.] Transfer about 100 mg of Sodium Sulfide, to a suitable container, add 10 mL of 3 N hydrochloric acid, and cover the top of the container with filter paper saturated with a 0.2 M lead acetate solution: a brownish or silvery-black color forms on the paper.Limit of iron: Dissolve about 5.0 g in 100 mL of water: the solution is clear and colorless.
Limit of sulfite and thiosulfate: Dissolve 3.0 g in 200.0 mL of filtered and degassed water. Add 100.0 mL of 0.2 N zinc sulfate, mix, and allow to stand for 30 minutes. Filter, add 1 mL of starch, and titrate 100.0 mL of the filtrate with 0.01 N iodine: not more than 3.0 mL is required.
Sodium Sulfide Nonahydrate Analytical Reagent Grade Specifications
Na2S-9H2O --- Formula Weight 240.18
CAS Number 1313-84-4
NOTE: To enhance stability, storage below 10C is recommended.
REQUIREMENTS
Appearance: Crystals, colorless or with only a slight yellow color
Assay: 98.0% Na2S . 9H2O
MAXIMUM ALLOWABLE
Ammonium (NH4): 0.005%
Sulfite and thiosulfate (as SO4): 0.1%
Iron: Passes test.
The Uses of Sodium Sulfide Nonahydrate:
Sodium sulphide nonahydrate is used in sulfur dyestuff, leather depilatory, rayon denitration, dyeing auxiliary, etc. It is employed as an oxygen scavenger and a metal precipitant in water treatment. It is used in bleaching etc.
The MSDS-SDS Hazard Statement of Sodium Sulfide Nonahydrate:
Sodium Sulfide Nonahydrate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 28-Jan-23
1. Product Identification
Product Name & Other Names: Sodium Sulfide Nonahydrate or Sodium monosulfide nonahydrate or Sodium sulphide nonahydrate.
CAS No.: 1313-84-4
EINECS EC-No.: 215-211-5
Molecular Weight: 240.18
Chemical Formula: Na2S-9H20
Relevant uses and uses advised against (if any): Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4) H302
Acute toxicity, Dermal (Category 3) H311
Skin corrosion (Category 1B) H314
Acute aquatic toxicity (Category 1) H400
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Toxic |
GHS Label Elements |
GHS Label Elements |
Signal Words: Danger
Hazard statements:
H302: Harmful if swallowed.
H311: Toxic in contact with skin.
H314: Causes severe skin burns and eye damage.
H400: Very toxic to aquatic life.
Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Sodium Sulfide Nonahydrate or Sodium monosulfide nonahydrate or Sodium sulphide nonahydrate.
CAS No.: 1313-84-4
EINECS EC-No.: 215-211-5
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flammability of the Product: Non-flammable.
Products of Combustion: Sulphur oxides, Sodium oxides, fumes.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use water to cool fire-exposed containers.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. On decomposition it may emit hydrogen sulfide. Containers may explode on heating.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Corrosive solid. Avoid touching the spilled material. Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
7. Handling and Storage
Precautions for safe handling: Do not ingest. Do not breathe dust. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, metals, acids.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established for the product. However, if Hydrogen sulfide is released in handling and use, then observe its limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: Yellowish powder.
Odor: rotten egg-like.
Odor threshold: Not available.
pH: Alkaline
Relative density: around 1.43
Boiling Point: 920C - lit.
Melting Point: 50C.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It soluble in water.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage. One can say it is moderately stable in atmospheric condition. Aqueous solutions and moist solid may slowly give off hydrogen sulfide gas. Air and light sensitive. May discolor on exposure to air. Liberates toxic hydrogen sulfide on contact with acids. Reacts violently with carbon, diazonium salts; n,n-dichloromethylamine, o-Nitroaniline, diazonium salt, water. Reacts with water to form strong solutions and Hydrogen sulfide Reacts with acid more vigorously, producing corrosive solutions, and hydrogen sulfide. Also incompatible with Acids, Aluminum, Zinc. Decomposes in air at 920-950 deg. C.
Hazardous Decomposition Products: It emits toxic hydrogen sulfide fumes when heated to decomposition. It may form sodium oxide and sulfur.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, metals & acids.
Conditions to Avoid: Incompatibles and moisture.
11. Toxicological Information
Toxicity data
Oral LD50 Mouse: 205 mg/kg
Oral LD50 Rat: 208 mg/kg; Intraperitoneal LD50 147 mg/kg
LD50 Dermal: < 340 mg/kg ( Rabbit )
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
12. Ecological Information
Toxicity to fish: LC50: 7.7 - 29.1 mg/L, 96h (Poecilia reticulata) for Na2S
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN number: 1849 Class: 8 Packing group: II
Proper shipping name: SODIUM SULFIDE, HYDRATED
IMDG/IMO:
UN number: 1849 Class: 8 Packing group: II
Proper shipping name: SODIUM SULFIDE, HYDRATED
IATA:
UN number: 1849 Class: 8 Packing group: II
Proper shipping name: SODIUM SULFIDE, HYDRATED
15. Regulatory Information
USA:
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
16. Other Information
Disclaimer:
*******************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
*******************************
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Sodium Sulfide Nonahydrate Structure
CAS Number ---, Sodium Sulfide Nonahydrate Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 12-nov-24
We manufacture:
Copper Sulfate or Cupric Sulphate
Fluorescein Sodium or Fluorescein Disodium