CAS Number 7758-98-7 anhydrous, 7758-99-8 pentahydrate, Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate USP BP Ph Eur Analytical Reagent FCC Food Grade Manufacturers Exporters
------ 
CAS Number 7758-98-7 anhydrous, 7758-99-8 pentahydrate, Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate Manufacturer Exporter
For Properties Specifications of Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate Click Properties, Specifications of Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate Manufacturer.
For Uses of Cupric Sulphate Anhydrous and Pentahydrate Click Uses of Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate Manufacturer.
For For SDS MSDS Sheet of Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate Click SDS Safety Data Sheet MSDS Sheet of Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate Manufacturer.
The Properties and Specifications of Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate:
Copper Sulfate Cupric Sulfate FCC Food Grade Specifications
CuSO4 Formula weight, anhydrous 159.6
CuSO4-5H2O Formula weight, pentahydrate 249.68
INS: 519 CAS: anydrous CAS 7758-98-7
CAS: pentahydrate CAS 7758-99-8
DESCRIPTION
Copper Sulfate occurs as blue crystals, crystalline granules, or powder. It effloresces slowly in dry air and is freely soluble in water, soluble in glycerin, and slightly soluble in alcohol.
Function: Nutrient.
REQUIREMENTS
Identification: A 1:20 solution gives positive tests for Copper and for Sulfate.
Assay: Not less than 98.0% and not more than 102.0% of CuSO4·5H2O.
Iron: Not more than 0.01%.
Lead: Not more than 4 mg/kg.
Substances Not Precipitated by Hydrogen Sulfide: Not more than 0.3%.
Copper Sulphate Pentahydrate BP Ph Eur Grade Specifications
Cupric Sulfate CuSO4-5H2O --- 249.7 --- CAS 7758-99-8
DEFINITION
Content: 99.0 per cent to 101.0 per cent.
CHARACTERS
Appearance: Blue, crystalline powder or transparent, blue crystals.
Solubility: Freely soluble in water, soluble in methanol, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. Add several drops of dilute ammonia to 1 ml of solution S (see Tests). A blue precipitate is formed. On further addition of dilute ammonia the precipitate dissolves and a dark blue colour is produced.
B. Loss on drying (see Tests).
C. Dilute 1 ml of solution S to 5 ml with water. The solution gives reaction of sulphates.
TESTS
Solution S: Dissolve 5 g in water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear.
Chlorides: Maximum 100 ppm.
Iron: Maximum 1.00 × 102 ppm.
Atomic absorption spectrometry: To meet the requirement.
Lead: Maximum 50.0 ppm.
Loss on drying: 35.0 per cent to 36.5 per cent, determined on 0.500 g by drying in an oven at 250 ± 10°C.
Cupric Sulfate Cupric Sulfate USP Grade Specifications
CuSO45H2O --- 249.69
Sulfuric acid, copper(2+) salt (1:1), pentahydrate.
Copper(2+) sulfate (1:1) pentahydrate [CAS 7758-99-8].
Anhydrous 159.61 [7758-98-7].
Cupric Sulfate, dried at 250 to constant weight, contains not less than 98.5 percent and not more than 100.5 percent of CuSO4.
Identification: A solution (1 in 10) responds to the tests for Copper and for Sulfate.
Loss on drying: Dry it at 250 to constant weight: it loses between 33.0% and 36.5% of its weight.
Limit of sodium: The limit is 0.02%.
Limit of potassium: The limit is 0.01%.
Limit of calcium: The limit is 0.005%.
Limit of iron: The limit is 0.003%.
Limit of nickel: The limit is 0.005%.
Cupric Sulfate Pentahydrate Analytical Reagent Grade Specifications
Copper(II) Sulfate Pentahydrate
CuSO4-5H2O Formula Wt 249.68
CAS Number 7758-99-8
REQUIREMENTS
Assay: 98.0 to 102.0% as CuSO4-5H2O
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.002%
Calcium (Ca): 0.005%
Iron (Fe): 0.003%
Nickel (Ni): 0.005%
Potassium (K): 0.01%
Sodium (Na): 0.02%
The Uses of Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate:
Copper sulphate pentahydrate is a fungicide and pesticide. Mixed with lime it is called Bordeaux mixture and used to control fungus on grapes, melons, and other berries. Another application is Cheshunt compound a mixture of copper sulfate and ammonium carbonate used in horticulture to prevent damping off in seedlings. A dilute solution of copper sulphate is used to treat aquarium fish for parasitic infections, and is also used to remove snails from aquariums. Copper ions are highly toxic to fish, so care must be taken with the dosage. Most species of algae can be controlled with very low concentrations of copper sulfate. Copper sulphate inhibits growth of bacteria such as Escherichia coli. It is also used as a wood preservative apart from its use in electroplating. It can also be used as a mordant in vegetable dyeing. Copper sulfate is used as a drying agent in the anhydrous form, as an additive for fertilizers and foods, and several industrial applications such as textiles, leather, wood, batteries, ink, petroleum, paint, and metal, among others. It is used also as an animal nutritional supplement. Copper sulfate is used in Fehling's and Benedict's solutions. Cupric sulfate is a compound used as an intravenous copper supplement for Total Parenteral Nutrition.
The MSDS-SDS Hazard Statement of Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate:
Copper Sulphate Anhydrous Pentahydrate or Cupric Sulfate Anhydrous Pentahydrate SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 10-Jan-23
1. Product Identification
Product Name & Other Names: Copper (II) Sulfate or Cupric Sulfate.
CAS No.: 7758-98-7 Anhydrous and 7758-99-8 Pentahydrate
EINECS EC Number: 231-847-6
Molecular Weight: 159.62 Anhydrous and 249.69 Pentahydrate
Chemical Formula: CuSO4 Anhydrous and CuSO4-5H2O Pentahydrate
Relevant uses and uses advised against (if any): Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, oral Category 4, H302
Skin corrosion/irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Hazardous to the aquatic environment, long-term hazard Category 1, H410
Labeling according to Regulation (EC) No 1272/2008
GHS Label Elements  Aquatic Toxicity |
GHS Label Elements |
Signal Words: Warning
Hazard statements:
H302: Harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements:
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Copper (II) Sulfate or Cupric Sulfate.
CAS No.: 7758-98-7 Anhydrous and 7758-99-8 Pentahydrate
EINECS EC Number: 231-847-6
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Contact a poison control center or physician for treatment advice. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flammability of the Product: Non-flammable.
Products of Combustion: During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Fire: Not considered to be a fire hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Extinguishing Media Not recommended: None specified.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Material is acidic when dissolved in water, contact with magnesium metal may evolve hydrogen gas. Anhydrous cupric sulfate formed on water loss (white color). Anhydrous salt will ignite hydroxylamine if present.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.
7. Handling and Storage
Danger! Very harmful if swallowed. Do not ingest.
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, alkalis, hydroxylamine, magnesium, hydrazine, nitromethane.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Permissible 1 mg/m3 TWA (dust and mist, as Cu, except copper fume) (listed under copper compounds, n.o.s.).100 mg/m3 IDLH (dust and mist, as Cu) (listed under copper compounds, n.o.s.). 0.2 mg/m3 TWA (fume).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: Transparent blue powder or crystals.
Odor: It is odorless.
Odor threshold: Not available.
pH: 3.7-4.2 for 10% solution.
Relative density: Not available.
Boiling Point: Not available.
Melting Point: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is freely soluble in water.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Oxides of sulfur, irritating and toxic fumes and gases, oxides of copper, copper fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Metals & alkalis. Avoid hydroxylamine, magnesium, hydrazine, nitromethane.
Conditions to Avoid: Incompatibles and moisture. Avoid Heat, Moisture & incompatibles
11. Toxicological Information
Acute toxicity
Harmful or fatal if swallowed. Product is an eye, skin irritant. Product is a respiratory tract irritant, and inhalation may cause nose irritation, sore throat, coughing, and chest tightness and possibly, ulceration and perforation of the nasal septum. Chronic overexposure to this product may cause liver and kidney damage, anemia, and other blood cell abnormalities.
Toxicity data
ORL-RAT LD50 ----- 300mg kg-1
ORL-MOUSE LD50 - 369 mg kg-1
Carcinogenic Effects: Not known to be a carcinogen by IARC NTP ACGIH OSHA.
Mutagenic Effects: Mutagenic for mammalian somatic cells. May cause damage to the following organs: kidneys, liver.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
12. Ecological Information
Environmental Fate: When released into the soil, this material is not expected to biodegrade. When released into the soil, this material may leach into groundwater. When released into water, this material is not expected to biodegrade. When released into water, this material is not expected to evaporate significantly. This material is expected to significantly bioaccumulate.
Environmental Toxicity: Toxicity data for copper. This material is expected to be very toxic to aquatic life. The LC50/96-hour values for fish are less than 1 mg/l. The IC50/72-hour values for algae are less than 1 mg/l.
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 0.024 mg/l - 48 h
48 Hr. EC50 water flea: 0.024 mg/L
96 Hr. LC50 rainbow trout: 0.1 mg/L;
48 Hr. LC50 bluegill: 0.6 mg/L;
96 Hr. LC50 goldfish: 0.1 mg/L.
13. Disposal Considerations
This product is a registered pesticide. Pesticide wastes are acutely hazardous. Improper disposal of excess pesticides or spray mixtures is a violation of Law. Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
Land Transport DOT USA, TDG Canada & ADR/RID Europe:
UN-Number: UN 3077
Shipping Name: Cupric Sulfate
CLASS 9; Packing group: III.
Sea Transport IMDG/IMO & Air Transport IATA/ICAO:
UN-Number: UN 3077
Shipping Name: Cupric Sulfate, Environmentally Hazardous Substance, solid, n.o.s.
CLASS 9 (Miscellaneous Dangerous Goods); Packing group: III.
15. Regulatory Information
USA:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
16. Other Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate Structure
CAS Number 7758-98-7 anhydrous, 7758-99-8 pentahydrate, Copper Sulfate or Cupric Sulphate Anhydrous and Pentahydrate Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 18-nov-24
We manufacture:
Glacial Acetic Acid Manufacturer
Copper Sulfate or Cupric Sulphate