Magnesium Chloride Anhydrous CAS Number 7786-30-3 and Magnesium Chloride Hexahydrate CAS Number 7791-18-6, Magnesium Chloride Anhydrous Hexahydrate Crystals Powder USP BP Ph Eur Analytical Reagent FCC Food Grade Manufacturers Exporters

Home ------ Contact Anmol Chemicals Industries

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals.

Chemical Exporter Air Cargo JarPacked Chemicals Pail for Chemicals Carboys Jumbo packing

Magnesium Chloride Anhydrous Manufacturers Exporters Magnesium Chloride Hexahydrate Crystals Manufacturers Exporters
Magnesium Chloride Anhydrous CAS Number 7786-30-3 and Magnesium Chloride Hexahydrate CAS Number 7791-18-6, Magnesium Chloride Anhydrous Hexahydrate Crystals Powder Manufacturer Exporter

For Properties Specifications of Magnesium Chloride Anhydrous Hexahydrate Click Properties, Specifications of Magnesium Chloride Anhydrous Hexahydrate Manufacturer.

For Uses of Magnesium Chloride Anhydrous Hexahydrate Click Uses of Magnesium Chloride Anhydrous Hexahydrate Manufacturer.

For For SDS MSDS Sheet of Magnesium Chloride Anhydrous Hexahydrate Click SDS Safety Data Sheet MSDS Sheet of Magnesium Chloride Anhydrous Hexahydrate Manufacturer.

The Properties and Specifications of Magnesium Chloride Anhydrous Hexahydrate:

We also offer Pharmaceutical grade Magnesium Chloride Anhydrous of Dry Basis Assay >99.9%, free from any impurities.

Anhydrous Magnesium Chloride contains 25.5% elemental magnesium by mass. It is ionic halides, being highly soluble in water. It is used in chemical industry as a lewis acid, although a weak one. We specialize in supplying pharmaceutical grade Magnesium Chloride Anhydrous of dry basis assay >99.9%, free from any visibile impurities, and moisture typically less than 1%, typically 0.5% moisture.

Specifications of Magnesium Chloride Anhydrous
Assay as MgCl2: Min 99% to 99.9%
Identification: Positive for Chloride & Magnesium
Solubility: Freely soluble in water
Description: A white deliquescent powder, free from visible impurities
pH of 10% w/v solution: 5.0-6.5
Sodium as Na: 50 ppm maximum.
Lead as Pb: 4 ppm maximum.
Moisture: 1%. (Generally we give it as 0.5% moisture).
Heavy metals: 20 ppm maximum.
Matter insoluble in water: 1000 ppm maximum.
Sulfate as SO4: 300 ppm maximum.
Arsenic: 1 ppm maximum.
Iron as Fe: 20 ppm maximum.
Total Aerobic Count: 1000 cfu/g.


Magnesium Chloride USP Grade Specifications:
MgCl2-6H2O - 203.30
Magnesium chloride hexahydrate CAS 7791-18-6
Magnesium chloride Anhydrous - 95.21 – CAS 7786-30-3

DEFINITION
Magnesium Chloride ;contains NLT 98.0% and NMT 101.0% of MgCl2-6H2O.

IDENTIFICATION
A. Identification Tests: General, Magnesium
B. Identification Tests: General, Chloride

Insoluble Matter: NMT 0.005%
Chloride and Sulfate, Sulfate: To pass the test. (0.005%).
Barium:
Sample: 1 g
Analysis: Dissolve the Sample in 10 mL of water, and add 1 mL of 2 N sulfuric acid.
Acceptance criteria: No turbidity is produced within 2 h.
Limit of Calcium: NMT 0.01%
Potassium:
Sample solution: 5 g
Analysis: Dissolve the Sample ;in 5 mL of water, and add 0.2 mL of sodium bitartrate.
Acceptance criteria: No turbidity is produced within 5 minutes.
Aluminum(where it is labeled as intended for use in hemodialysis): NMT 1 ppm.
pH 50 mg/mL in carbon dioxide-free water: 4.5–7.0
Packaging and Storage: Preserve in tight containers.

Magnesium Chloride BP Ph Eur Specifications
MgCl2-6H2O
Magnesium Chloride BP
Magnesium Chloride Hexahydrate CAS 7791-18-6
Magnesium Chloride Anhydrous 95.21- CAS 7786-30-3

DEFINITION
Content: 98.0 per cent to 101.0 per cent of MgCl2,6H2O.

CHARACTERS
Appearance: Colourless crystals, hygroscopic.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).

IDENTIFICATION
Water % (see Tests).
It gives reaction of chlorides.
It gives the reaction of magnesium.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 5 ml of solution S add 0.05 ml of phenol red solution R. Not more than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides: Maximum 500 ppm.
Sulphates: Maximum 100 ppm, determined on solution S.
Aluminium: Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic: Maximum 2 ppm, determined on 0.5 g.
Calcium: Maximum 0.1 per cent.
Iron: Maximum 10 ppm, determined on solution S.
Potassium: Maximum 5.0 × 102 ppm, if intended for use in the manufacture of parenteral dosage forms.
Atomic emission spectrometry: Passes the test
Heavy metals: Maximum 10 ppm.
Water: 51.0 per cent to 55.0 per cent, determined on 50.0 mg.


Magnesium Chloride FCC Food Grade Specifications
MgCl2-6H2O Formula weight 203.30

DESCRIPTION
Magnesium Chloride occurs as colorless flakes or crystals. It contains six molecules of water of hydration. It is hygroscopic, very soluble in water, and freely soluble in alcohol.
Function: Color-retention agent; firming agent.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Magnesium and for Chloride.
Assay: Not less than 99.0% and not more than 105.0% of MgCl2·6H2O.
Ammonium: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Sulfate: Not more than 0.03%.

Magnesium chloride (E511 is an important coagulant used in the preparation of cheese and tofu. In Japan it is sold as nigari (derived from the Japanese word for "bitter"), In China, it is called lushuiNigari or lushui consists mostly of magnesium chloride, with some magnesium sulfate and other trace elements. It is also an ingredient in baby formula milk.


Magnesium Chloride Hexahydrate Analytical Reagent Specifications
MgCl2-6H2O
Formula Wt 203.30
CAS Number 7791-18-6

REQUIREMENTS
Assay: 99.0-102.0% MgCl2-6H2O

MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Nitrate (NO3): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Ammonium (NH4): 0.002%
Barium (Ba): 0.005%
Calcium (Ca): 0.01%
Manganese (Mn): 5 ppm
Potassium (K): 0.005%
Sodium (Na): 0.005%
Strontium (Sr): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm


The Uses of Magnesium Chloride Anhydrous Hexahydrate:

Magnesium is a naturally occurring mineral. Magnesium is important for many systems in the body, especially the muscles and nerves. Magnesium chloride is used to treat or prevent magnesium deficiency (lack of natural magnesium in the body). Magnesium chloride is a type of salt used as a nutritional supplement. Magnesium chloride may improve health by increasing the amount of magnesium in people with low levels of it. Anhydrous Magnesium chloride is the main precursor to metallic magnesium. Magnesium chloride is one of many substances used for dust control, soil stabilization, and wind erosion mitigation. It is used as lewis agent and catalyst in chemical reactions. Magnesium chloride is used in nutraceutical and pharmaceutical preparations.


The MSDS-SDS Hazard Statement of Magnesium Chloride Anhydrous Hexahydrate:

Magnesium Chloride Anhydrous Hexahydrate SDS, Safety Data Sheet
MSDS
12-Mar-22

1. Product Identification

Product Name & Other Names: Magnesium chloride anhydrous and Magnesium chloride hexahydrate.
CAS No.: Magnesium Chloride Anhydrous CAS Number 7786-30-3 and Magnesium Chloride Hexahydrate CAS Number 7791-18-6
EINECS: EC Number: 232-094-6
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Generally described as non-hazardous as per GHS, however, we will prefer to add the following warning.
Skin corrosion/irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Irritant
Irritant

Signal Word: Warning

Hazard Statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.

Precautionary Statements
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash thoroughly after handling.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get Medical advice/attention if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P402: Store in a dry place.

3. Composition/Information on Ingredients

Product Name & Other Names: Magnesium chloride anhydrous and Magnesium chloride hexahydrate.
CAS No.: Magnesium Chloride Anhydrous CAS Number 7786-30-3 and Magnesium Chloride Hexahydrate CAS Number 7791-18-6

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.

5. Fire Fighting Measures

Flammability of the Product: Non-flammable.
Products of Combustion: Hydrochloric acid and Magnesium Oxide may be formed.
Fire: Magnesium Chloride Anhydrous is not flammable.
Explosion: Not likely.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents and moisture. Keep in a tightly closed container, protect against physical damage, or contact with water.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: White powder or crystals or granules/flakes/lumps.
Odor: None.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Highly soluble in water.
Viscosity: Not available.
Molecular Weight: 95.21 for anhydrous and 203.31 for hexahydrate.
Chemical Formula: MgCl2 for anhydrous and MgCl2.6H2O for hexahydrate.

10. Stability and Reactivity

Stability: Magnesium Chloride is very delinquent in nature. It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Hydrochloric acid and Magnesium oxide.
Hazardous Polymerization: Will not occur.
Incompatibilities: Moisture and strong oxidizing agents.
Conditions to Avoid: Incompatibles. Avoid dusting.

11. Toxicological Information

Toxicity to Animals:
Oral, mouse: LD50 = 4700 mg/kg;
Oral, rat: LD50 = 2800 mg/kg;
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

12. Ecological Information

On Magnesium Chloride Anhydrous Basis:
Toxicity to fish
: static test LC50 - Pimephales promelas (fathead minnow) - 2.119,3 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: static test LC50 - Daphnia magna (Water flea) - 548,4 mg/l - 48 h
Toxicity to algae: Growth inhibition EC50 - Desmodesmus subspicatus (Scenedesmus subspicatus) - > 100 mg/l - 72 h
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA/ICAO: Not controlled.

15. Regulatory Information

USA:
SARA 311/312 Hazards
: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Section 16 - Additional Information

European Labeling in Accordance with EC Directives:
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
H335 = May cause respiratory irritation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
Xi irritant
Risk Phrases:
R36/37/38- Irritating to eyes, skin, and respiratory irritation.

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.

Magnesium Chloride Anhydrous Suppliers Magnesium Chloride Anhydrous Hexahydrate Suppliers
Magnesium Chloride Anhydrous Hexahydrate Structure

Magnesium Chloride Anhydrous CAS Number 7786-30-3 and Magnesium Chloride Hexahydrate CAS Number 7791-18-6, Magnesium Chloride Anhydrous Hexahydrate Crystals Powder Manufacturer Exporter

ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA

e-mail: info(At the rate i.e. @)anmol.org

Copyright. 26-may-22

We manufacture:

Glacial Acetic Acid Manufacturer

Ammonium Persulfate Exporter

Calcium Saccharate Supplier

Calcium Lactobionate

Carbamide Peroxide

Chromic Chloride

Formaldehyde Solution

Lithium Carbonate

Magnesium Chloride

Potassium Aluminium Sulfate

Selenious Acid

Sodium Selenite

Sodium Formate

Vanadyl Sulfate