CAS Number 7446-70-0, Aluminum Chloride Anhydrous Manufacturers Exporters
------ 
CAS Number 7446-70-0, Aluminum Chloride Anhydrous or Aluminium Chloride Anhydrous
For Properties Specifications of Aluminum Chloride Anhydrous Click Properties, Specifications of Aluminum Chloride Anhydrous Manufacturer.
For Uses of Aluminum Chloride Anhydrous Click Uses of Aluminum Chloride Anhydrous Manufacturer.
For For SDS MSDS Sheet of Aluminum Chloride Anhydrous Click SDS Safety Data Sheet MSDS Sheet of Aluminum Chloride Anhydrous Manufacturer.
The Properties and Specifications of Aluminum Chloride Anhydrous:
Aluminium chloride, also known as aluminium trichloride, is an inorganic compound with the formula AlCl3. The anhydrous material is important commercially. The compound is often cited as a Lewis acid.
Anhydrous Aluminium Chloride or Aluminum Chloride Anhydrous CAS 7446-70-0 is available in two forms viz. Powder and Crystals:| Characteristic | Aluminium Chloride Powder | Aluminium Chloride Crystals |
| Particle Size | 0-2 mm | 2-10 mm |
| Color | Yellowish-Grey-Greenish | Yellowish-Grey-Greenish |
| Odor | Hydrochloric Acid Odor | Hydrochloric Acid Odor |
| Assay, percent by mass, minimum | 98.5% | 98.5% |
| Insoluble matter, percent by mass, maximum | 0.4% | 0.4% |
| pH of 5% solution | 3-4.5 | 3-4.5 |
The Uses of Aluminum Chloride Anhydrous:
AlCl3 is a common Lewis-acid catalyst for Friedel-Crafts reactions, both acylations and alkylations. It is important in Friedel-Crafts reaction. Anhydrous aluminium chloride is a powerful Lewis acid. Anhydrous aluminium chloride is hygroscopic, having a very pronounced affinity for water. It fumes in moist air.
The MSDS-SDS Hazard Statement of Aluminum Chloride Anhydrous:
Aluminum Chloride Anhydrous SDS, Safety Data Sheet Aluminium Chloride Anhydrous
MSDS Sheet, Material Safety Data Sheet 30-Dec-22
1. Product Identification
Product Name & Other Names: Aluminum Chloride Anhydrous or Aluminium Chloride Anhydrous or Aluminum trichloride or Trichloro aluminum.
CAS No.: 7746-70-0
EINECS: EC Number: 231-208-1
Molecular Weight: 133.34
Chemical Formula: AlCl3
Relevant uses and uses advised against (if any): Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008:
Acute toxicity, oral Category 5, H303
Skin corrosion/irritation Category 1A, B, C, H314
Specific target organ toxicity – repeated exposure, Inhalation Category 1, Lungs. Central nervous system H372
Hazardous to the aquatic environment, acute hazard Category 3, H402
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Health Hazard |
GHS Label Elements |
Signal Words: Danger
Hazard statements:
H303: May be harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H372: Causes damage to organs (Lung, Central nervous system) through prolonged or repeated exposure.
H402: Harmful to aquatic life.
Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P352: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P337+P313: If eye irritation persists: Get medical advice/ attention.
Other hazards which do not result in classification: Reacts violently with water.
3. Composition/Information on Ingredients
Product Name & Other Names: Aluminum Chloride Anhydrous or Aluminium Chloride Anhydrous or Aluminum trichloride or Trichloro aluminum.
CAS No.: 7746-70-0
EINECS: EC Number: 231-208-1
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Treat symptomatically.
5. Fire Fighting Measures
Flammability of the Product: The product is not flammable.
Products of Combustion: It forms oxides of aluminum and hydrochloric acid when heated to decomposition.
Fire Extinguishing Media: Use dry chemical, foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area.Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, water, ethylene oxide, oxygen difluoride, phenols, nitro compounds, perchloryl fluoride, benzene. Avoid moisture and store away from water sources. It is to be stored in corrosive area.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established. Assure it as below 2mg/m3.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area.
9. Physical and Chemical Properties
Appearance: Yellowish crystals or powder or granules.
Odor: Typical
Odor threshold: Not available.
pH: Not available.
Relative density: around 2.45
Boiling Point: Sublimes.
Melting Point: Sublimes.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Readily soluble in water and it reacts with it.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage. It must be kept in air-tight containers.
Hazardous Decomposition Products: It produces oxides of aluminum along with hydrochloric acid when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Reacts with metals and water including moisture. Water, ethylene oxide, oxygen difluoride, phenols, nitro compounds (organic, e.g. nitrobenzene, nitroglycerine, picric acid, trinitrotoluene), perchloryl fluoride, benzene are reported incompatibles.
Conditions to Avoid: Moisture, Heat, Sun light, Incompatibles.
11. Toxicological Information
Toxicity to Animals:
Skin, rabbit: LD50 = >2000 mg/kg;
Oral, mouse: LD50 = 1130 mg/kg;
Oral, rat: LD50 = 3450 mg/kg;
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: It may have mutagenic effect.
12. Ecological Information
Toxicity to fish:
LC50 - Carassius auratus (goldfish) - 0.15 mg/l - 7 d
LC50 - Oncorhynchus mykiss (rainbow trout) - 7 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates:
EC50 - Daphnia magna (Water flea) - 3.9 mg/l - 48 h
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN-Number: 1726 Class: 8 Corrosive Material Packing group: II
Proper shipping name: Aluminum Chloride Anhydrous
Marine pollutant: No
Poison Inhalation Hazard: No
IMDG/IMO:
UN-Number: 1726 Class: 8 Corrosive Material Packing group: II; -- EMS-No: F-A, S-Q
Proper shipping name: Aluminum Chloride Anhydrous
Marine pollutant: No
IATA/ICAO:
UN-Number: 1726 Class: 8 Corrosive Material Packing group: II
Proper shipping name: Aluminum Chloride Anhydrous.
15. Regulatory Information
USA:
SARA 311/312 Hazards: Acute Health Hazard Chronic Health Hazard.
California Prop 65: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
16. Other Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Aluminum Chloride Anhydrous Structure
CAS Number 7446-70-0 Aluminum Chloride Anhydrous or Aluminium Chloride Anhydrous Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 23-nov-24
We manufacture:
Glacial Acetic Acid Manufacturer
Aluminum Chloride Hexahydrate Anhydrous
Aluminum Chlorohydrate Solution Powder
Aluminium Sodium Silicate or Sodium Aluminosilicate
Dihydroxyaluminum Aminoacetate