CAS Number 1344-00-9, Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate BP Ph Eur FCC Food Grade Manufacturers Exporters

Home ------ Contact Anmol Chemicals Industries

Chemical Exporter Air Cargo JarPacked Chemicals Pail for Chemicals Carboys Jumbo packing

Aluminium Sodium Silicate or Sodium Aluminosilicate Manufacturers Exporters
CAS Number 1344-00-9, Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate BP Ph Eur FCC Food Manufacturer Exporter

For Properties Specifications of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Click Properties, Specifications of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Manufacturer.

For Uses of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Click Uses of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Manufacturer.

For For SDS MSDS Sheet of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Click SDS Safety Data Sheet MSDS Sheet of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Manufacturer.

The Properties and Specifications of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate:

Specifications of Aluminium Sodium Silicate BP Ph Eur Grade:

DEFINITION
Silicic acid aluminium sodium salt of synthetic origin.
Content:
- aluminium (Al; Mr 26.98): 2.7 per cent to 7.9 per cent (dried substance);
- sodium (Na; Mr 22.99): 3.7 per cent to 6.3 per cent (dried substance).

CHARACTERS
Appearance: White or almost white, fine, light, amorphous powder.
Solubility: Practically insoluble in water and in organic solvents.

IDENTIFICATION
A. Transfer 1.0 g to a 100 mL beaker and add 10 mL of dilute hydrochloric acid. Mix, cover with a watch glass and boil for 15 min. Allow to cool to room temperature, mix and centrifuge the solution. 2 mL of the supernatant gives the reaction of aluminium.
B. 2 mL of the supernatant obtained in identification test A gives reaction of sodium.
C. 0.2 g gives the reaction of silicates.

TESTS
pH: 9.5 to 11.5.
Disperse 5.0 g in 100 mL of carbon dioxide-free water.
Arsenic: Maximum 3 ppm.
Lead: Maximum 5 ppm.
Atomic absorption spectrometry: To pass the test.
Loss on drying: Maximum 8.0 per cent, determined on 1.000 g by drying in an oven at 105C for 4 h.
Loss on ignition: 5.0 per cent to 11.0 per cent (dried substance), determined on 1.000 g by ignition in a platinum crucible to constant mass at 1000 ± 25C.
Microbial contamination:
TAMC: acceptance criterion 1000 CFU/g.
TYMC: acceptance criterion 100 CFU/g.
Absence of Escherichia coli.

Specifications of Sodium Aluminosilicate FCC Food Grade:
Sodium Silicoaluminate
INS: 554 CAS 1344-00-9

DESCRIPTION
Sodium Aluminosilicate occurs as a fine, white, amorphous powder, or as beads. It is a series of hydrated sodium aluminum silicates having Na2O:Al2O3:SiO2 molar ratios of approximately 1:1:13, respectively. It is insoluble in water and in alcohol and other organic solvents, but at 80C to 100C, it is partially soluble in strong acids and solutions of alkali hydroxides.
Function: Anticaking agent.

REQUIREMENTS
Identification:
A. Mix 500 mg of sample with 2.5 g of anhydrous potassium carbonate and heat the mixture in a platinum or nickel crucible until it melts completely. Cool, add 5 mL of water, and allow to stand for 3 min. Heat the bottom of the crucible gently, detach the melt, and transfer it into a beaker with the aid of about 50 mL of water. Gradually add hydrochloric acid until no effervescence is observed, add 10 mL more of the acid, and evaporate to dryness on a steam bath. Cool, add 20 mL of water, boil, and filter through ash-free filter paper. An insoluble residue of silica remains. Retain the filtrate for Identification Test B.
Caution: Handle hydrofluoric acid in an appropriate fume hood.
Transfer the gelatinous residue to a platinum dish, and cautiously add 5 mL of hydrofluoric acid. The precipitate dissolves. (If it does not dissolve, repeat the treatment with hydrofluoric acid.) Heat, and introduce a glass stirring rod with a drop of water on the tip into the resulting vapors. The drop becomes turbid.
B. Portions of the filtrate obtained in Identification Test A give positive tests for Aluminum and for Sodium.
Assay:
Silicon Dioxide Not less than 66.0% and not more than 76.0% of SiO2 after drying.
Aluminum Oxide Not less than 9.0% and not more than 13.0% of Al2O3 after drying.
Sodium Oxide Not less than 4.0% and not more than 7.0% of Na2O after drying.
Lead: Not more than 5 mg/kg.
Loss on Drying: Not more than 8.0%.
Loss on Ignition: Between 8.0% and 13.0% after drying.
pH: (20% slurry) Between 6.5 and 10.5.


The Uses of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate:

Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Structure is widely used as a food additive, E 554 where it acts as an anticaking (free flow) agent. It is generally recognized as safe (GRAS) when used as an anticaking agent at levels not exceeding 2% in accordance with a good manufacturing practice.


The MSDS-SDS Hazard Statement of Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate:

Sodium aluminosilicate or Sodium aluminium silicate or Aluminum sodium silicate or Sodium silicoaluminate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
23-Nov-24

Section 1: Chemical Product and Company Identification

Product Name & Other Names: Sodium aluminosilicate or Sodium aluminium silicate or Aluminum sodium silicate or Sodium silicoaluminate.
CAS Number
: 1344-00-9
EINECS EC Code: 215-684-8
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

Section 2: Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according GHS & Regulation (EC) No 1272/2008

GHS Label Elements
NONE

Signal Word: None

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Section 3: Composition and Information on Ingredients

Product Name & Other Names: Sodium aluminosilicate or Sodium aluminium silicate or Aluminum sodium silicate or Sodium silicoaluminate.
CAS Number
: 1344-00-9
EINECS EC Code: 215-684-8

Section 4: First Aid Measures

Always seek medical advice after the first aid treatment.

Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.

Section 5: Fire and Explosion Data

Flammability of the Product: Non-flammable.
Products of Combustion: Aluminum oxide, Sodium oxide, Silicon oxides.
Fire Fighting Media and Instructions: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Special Information In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.

Section 6: Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.

Section 7: Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray.Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, acids.

Section 8: Exposure Controls/Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels low.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid white powder.
Odor: Odorless.
Odor threshold: Not applicable.
pH: No data found.
Specific Gravity: No data found.
Melting point/freezing point: No data found.
Initial boiling point and boiling range: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.

Section 10: Stability and Reactivity Data

Stability: It is stable in room temperature in closed containers under normal storage & handling.
Conditions of instability: Incompatible materials
Products of decomposition: Aluminum oxide, Sodium oxide, Silicon oxides.
Incompatibility with various substances: Strong oxidizing agents.
Polymerization: None reported.

Section 11: Toxicological Information

Toxicity to Animals:
LD50 Oral - Rat = > 5000 mg/kg.
LD50 Dermal - Rabbit = > 5,000 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Reproductive Effects: No data found.
Developmental Effects: No data found.

Section 12: Ecological Information

Toxicity to fish: LC50 - Poecilia reticulata (guppy) - 1,800 - 3,200 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: LC50 - Daphnia magna (Water flea) - 1,000 - 1,800 mg/l - 48 h.
Persistence and Degradability: No data found.
Mobility: No data found.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found for assessment.

Section 13: Disposal Considerations

Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations. Follow all the pollution control laws.

Section 14: Transport Information

DOT (USA): Not controlled.
IMDG: Not controlled.
IATA: Not controlled.
ADR/RID: Not controlled.

Section 15: Other Regulatory Information

USA Regulations:
California Prop. 65 Components: Not listed.
Section 302 Extremely Hazardous Substances and TPQs: None.
SARA 311/312 Hazards: See section 2.

Section 16 - Additional Information

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.

Aluminium Sodium Silicate or Sodium Aluminosilicate Suppliers
Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Structure

CAS Number 1344-00-9, Aluminium Sodium Silicate or Sodium Aluminosilicate or Aluminum Sodium Silicate Manufacturer Exporter

ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA

e-mail: info(At the rate i.e. @)anmol.org

Copyright. 11-dec-24

We manufacture:

Aluminum Chloride Anhydrous

Aluminum Chloride Hexahydrate Anhydrous

Aluminum Chlorohydrate Solution Powder

Aluminum Magnesium Silicate

Aluminium Sodium Silicate or Sodium Aluminosilicate

Dihydroxyaluminum Aminoacetate

Dihydroxyaluminum Sodium Carbonate

Fumed Silica or Colloidal Silicon Dioxide

Magnesium Trisilicate

Potassium Aluminium Sulfate

Potassium Bitartrate

Sodium Acetate

Sodium Alginate

Sodium Ascorbate.