CAS Number 868-14-4, Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate USP NF BP Ph Eur Analytical Reagent FCC Food Grade Manufacturers Exporters

Home ------ Contact Anmol Chemicals Industries

Chemical Exporter Air Cargo JarPacked Chemicals Pail for Chemicals Carboys Jumbo packing

Potassium Bitartrate or Cream of Tartar Manufacturers Exporters
CAS Number 868-14-4, Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Manufacturer Exporter

For Properties Specifications of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Click Properties, Specifications of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Manufacturer.

For Uses of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Click Uses of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Manufacturer.

For For SDS MSDS Sheet of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Click SDS Safety Data Sheet MSDS Sheet of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Manufacturer.

The Properties and Specifications of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate:

Potassium Bitartrate USP Grade Specifications
Potassium Bitartrate (Also called Cream of Tartar)
C4H5KO6 188.18
Butanedioic acid 2,3-dihydroxy-, [R-(R*,R*)]-, monopotassium salt.
Potassium hydrogen tartrate CAS 868-14-4

Potassium Bitartrate, dried at 105 for 3 hours, contains not less than 99.0 percent and not more than 101.0 percent of C4H5KO6.

Identification:
A: Ignite it: it leaves a residue that imparts a reddish purple color to a non-luminous flame.
B: A saturated solution of Potassium Bitartrate yields a yellowish orange precipitate with sodium cobalt nitrite TS.
C: A solution (1 in 10 of Potassium Bitartrate) responds to the tests for Tartrate.
Insoluble matter: Mix 500 mg of it with 3 mL of 6 N ammonium hydroxide: no un-dissolved residue remains.
Limit of ammonia:
Sodium hypochlorite solution— Use a commercially available solution that contains between 4.0% and 6.0% of sodium hypochlorite.
Oxidizing solution: [NOTE—Prepare on the day of use.] Prepare a mixture of alkaline sodium citrate TS and Sodium hypochlorite solution (4:1).
Diluted sodium nitroferricyanide solution: Prepare a mixture of water and sodium nitroferricyanide TS (10:1).
Standard solution: Transfer 300 mg of ammonium chloride, previously dried over silica gel for 4 hours, to a 1-L volumetric flask, and dilute with water to volume. This solution contains 100 =g of ammonia per mL. Dilute this solution quantitatively, and stepwise if necessary, with water to obtain a solution having a concentration of 0.25 =g of ammonia per mL.
Test solution: Transfer 250 mg of Potassium Bitartrate to a 100-mL volumetric flask, and dissolve in and dilute with water to volume. Heat gently to facilitate the dissolution.
Procedure: [NOTE—Carefully follow the order of addition stated below.] Separately transfer 6.0 mL each of the Standard solution and the Test solution to two color-comparison tubes. To each tube add 0.4 mL of phenol TS, 0.4 mL of Diluted sodium nitroferricyanide solution, and 1.0 mL of Oxidizing solution. Dilute with water to 10 mL, mix, and allow to stand for 1 hour: the color of the Test solution is not darker than the color of the Standard solution (0.01%).
Heavy metals: the limit is 0.002%.


Potassium Acid Tartrate FCC Food Grade Specifications
Potassium Bitartrate; Cream of Tartar
KOOCCH(OH)CH(OH)COOH
C4H5KO6 Formula weight 188.18
INS: 336 CAS 868-14-4

DESCRIPTION
Potassium Acid Tartrate occurs as colorless or slightly opaque crystals, or as a white, crystalline powder. It is a salt of L(+)- tartaric acid. One gram dissolves in 165 mL of water at 25C, in 16 mL of boiling water, and in 8820 mL of alcohol. A saturated solution is acid to litmus.
Function: Acidifier; buffer.

REQUIREMENTS
Identification:
A. When sufficiently heated, a sample chars and emits flammable vapors having an odor resembling that of burning sugar. At a higher temperature and with free access to air, the heat consumes the carbon of the black residue, and a white, fused mass of potassium carbonate remains that imparts a red-purple color to a non-luminous flame.
B. Mix a saturated solution of sample with sodium cobalt nitrite TS. A yellow-orange precipitate forms.
C. Neutralize a saturated solution of sample with 1 N sodium hydroxide in a test tube, add silver nitrate TS, then just sufficient 6 N ammonium hydroxide to dissolve the white precipitate, and boil the solution. A mirror forms on the inner surface of the test tube from the silver deposited there.
Assay: Not less than 99.0% and not more than 101.0% of C4H5KO6 after drying.
Ammonia: Passes test.
Insoluble Matter: Passes test.
Lead: Not more than 2 mg/kg.


The Uses of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate:
Approved by the FDA as a direct food substance, potassium bitartrate is used as an additive, stabilizer, pH control agent, antimicrobial agent, processing aid, or thickener in various food products.


The MSDS-SDS Hazard Statement of Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate:

Potassium Bitartrate Cream of Tartar SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
 16-Jan-23

1. Product Identification

Product Name & Other Names: Potassium Bitartrate or Potassium Acid Tartrate or Potassium Hydrogen Tartrate or Cream of Tartar.
CAS No.: 868-14-4
EINECS EC Number:  212-769-1
Molecular Weight: 188.18
Chemical Formula: KOCO(CHOH)2COOH
Relevant uses and uses advised against (if any): Industrial Manufacturing

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
NONE

Signal Word: None

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

3. Composition/Information on Ingredients

Product Name & Other Names: Potassium Bitartrate or Potassium Acid Tartrate or Potassium Hydrogen Tartrate or Cream of Tartar.
CAS No.: 868-14-4
EINECS EC Number:  212-769-1

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing.
Skin Contact:
 Wash exposed area with soap and water. Get medical advice if irritation develops.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

5. Fire Fighting Measures

Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for this substance. However, if conditions of use create discomfort to the worker, a local exhaust system should be considered.
Personal Respirators (NIOSH Approved): Not expected to require personal respirator usage. For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Safety glasses. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

9. Physical and Chemical Properties

Appearance: Colorless crystals or white crystalline powder.
Odor: Odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: around 1.98
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Slightly soluble in water.
Viscosity: Not available.

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: When heated to decomposition, substance may emit oxides of carbon.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: No information found.

11. Toxicological Information

No LD50/LC50 information found relating to normal routes of occupational exposure.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: Not available.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Toxicity to fish: No information available.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA/ICAO: Not controlled.

15. Regulatory Information
USA Regulations:
SARA 311/312: No SARA hazards.

16. Other Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.

Potassium Bitartrate or Cream of Tartar Suppliers
Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Structure

CAS Number 868-14-4, Potassium Bitartrate or Cream of Tartar or Potassium Acid Tartrate Manufacturer Exporter

ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA

e-mail: info(At the rate i.e. @)anmol.org

Copyright. 17-jan-23

We manufacture:

Glacial Acetic Acid Manufacturer

Aluminum Chloride Anhydrous

Aluminum Chloride Hexahydrate Anhydrous

Aluminum Chlorohydrate Solution Powder

Aluminum Magnesium Silicate

Dihydroxyaluminum Aminoacetate

Dihydroxyaluminum Sodium Carbonate

Ammonium Chloride

Ammonium Bicarbonate

Ammonium Carbonate

Monoammonium Phosphate

Diammonium Phosphate

Ammonium Sulfate

Ammonium Persulfate Exporter

Benzoic Acid

Benzododecinium Bromide

Benzyl Alcohol

Benzyl Benzoate

Bismuth Citrate

Bismuth Subcarbonate

Bismuth Subcitrate Potassium

Bismuth Subgallate

Borax

Boric Acid

Butylated Hydroxyanisole

Butylated Hydroxytoluene

Calcium Acetate

Calcium Borogluconate

Calcium Butyrate

Calcium Carbonate

Calcium Chloride

Calcium Citrate

Calcium Fructoborate

Calcium Glubionate

Calcium Gluconate

Calcium Gluceptate or Calcium Glucoheptonate

Calcium Glycerophosphate

Calcium Lactate

Calcium Lactate Gluconate

Calcium Lactobionate

Calcium Levulinate

Calcium Hydroxide

Calcium Magnesium Lactate Gluconate

Calcium Oxide

Calcium Phosphate Monobasic

Calcium Phosphate Dibasic

Calcium Phosphate Tribasic

Calcium Phospholactate

Calcium Propionate

Calcium Polystyrene Sulfonate

Calcium Saccharate Supplier

Calcium Stearate

Calcium Succinate

Calcium Sucrose Phosphate

Calcium Sulfate

Calcium Undecylenate

Carbamide Peroxide

Chromic Chloride

Chromium Picolinate

Citric Acid

Cobalt Acetate

Cobalt Chloride

Cobalt Gluconate

Copper Sulfate or Cupric Sulphate

Copper Gluconate

Copper Chloride, Cupric Chloride, Cuprous Chloride

Dimeticone or Dimethicone

Ferric Chloride Anhydrous Hexahydrate

Formaldehyde Solution

Fumaric Acid

Gentian Violet

Gluconolactone

Glucuronolactone

Glutaraldehyde

Hyaluronic Acid

Iron Sucrose

Lactic Acid

Lactobionic Acid

Lithium Carbonate

Lithium Citrate

Lithium Hydroxide

Magnesium Acetate

Magnesium Borogluconate

Magnesium Butyrate

Magnesium Chloride

Magnesium Citrate

Magnesium Gluconate

Magnesium Glycerophosphate

Magnesium Lactate

Magnesium Oxide

Magnesium Sulfate

Magnesium Stearate

Magnesium Taurate

Magnesium Trisilicate

Maleic Acid

Malic Acid

Manganese Borogluconate

Manganese Chloride

Manganese Gluconate

Hydrated Manganese Glycerophosphate

Manganese Sulfate

Methylene Blue

Myristic Acid

Octyldodecanol

Oleic Acid

Phenylethyl Alcohol

Phenylmercuric Acetate

Phenylmercuric Nitrate

Picric Acid

Potassium Acetate

Potassium Aluminium Sulfate

Potassium Bitartrate

Potassium Bromide

Potassium Bicarbonate

Potassium Carbonate

Potassium Chloride

Potassium Citrate

Potassium Gluconate

Potassium Hydroxide Pellets

Selenious Acid

Sodium Selenite

Sodium Formate

Vanadyl Sulfate