CAS Number 127-08-2, Potassium Acetate USP BP Ph Eur Analytical Reagent Food Grade Manufacturers Exporters
------ 
CAS Number 127-08-2, Potassium Acetate Manufacturer Exporter
For Properties Specifications of Potassium Acetate Click Properties, Specifications of Potassium Acetate Manufacturer.
For Uses of Potassium Acetate Click Uses of Potassium Acetate Manufacturer.
For For SDS MSDS Sheet of Potassium Acetate Click SDS Safety Data Sheet MSDS Sheet of Potassium Acetate Manufacturer.
The Properties and Specifications of Potassium Acetate:
Potassium Acetate USP Grade Specifications
C2H3KO2 98.14
Acetic acid, potassium salt. CAS 127-08-2.
Potassium Acetate contains not less than 99.0 percent and not more than 100.5 percent of C2H3KO2, calculated on the dried basis.
Identification: A solution (1 in 10) responds to the tests for Potassium and for Acetate.
pH: between 7.5 and 8.5, in a solution (1 in 20).
Loss on drying: Dry it at 150 for 2 hours: it loses not more than 1.0% of its weight.
Heavy metals: the limit is 0.002%.
Limit of sodium: To pass the test not more than 0.03% of sodium is found.
Potassium Acetate BP Ph Eur Grade Specifications
C2H3O2K -- 98.14 -- CAS 127-08-2
DEFINITION
Potassium acetate contains not less than 99.0 per cent and not more than the equivalent of 101.0 per cent of C2H3KO2, calculated with reference to the dried substance.
CHARACTERS
A white, crystalline powder or colourless crystals, deliquescent, very soluble in water, freely soluble in alcohol.
IDENTIFICATION
A. It gives reaction of acetates.
B. It gives reaction of potassium.
TESTS
Solution S: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: Dissolve 1.0 g in carbon dioxide-free water and dilute to 20 ml with the same solvent. The pH of the solution is 7.5 to 9.0.
Reducing substances: Dilute 10 ml of solution S to 100 ml with water. Add 5 ml of dilute sulphuric acid and 0.5 ml of a 0.32 g/l solution of potassium permanganate. Mix and boil gently for 5 min. The solution remains pink.
Chlorides: Dilute 2.5 ml of solution S to 15 ml with water. The solution complies with the limit test for chlorides (200 ppm).
Sulphates: Dilute 7.5 ml of solution S to 15 ml with distilled water. The solution complies with the limit test for sulphates (200 ppm).
Aluminium: If intended for use in the manufacture of peritoneal dialysis solutions, haemofiltration solutions or hem dialysis solutions, it complies with the test for aluminium. Dissolve 2.0 g in 50 ml of water and add 5 ml of acetate buffer solution pH 6.0. The solution complies with the limit test for aluminium (1 ppm). Use as a reference solution a mixture of 1 ml of aluminium standard solution (2 ppm Al), 5 ml of acetate buffer solution pH 6.0 R and 49 ml of water. To prepare the blank use a mixture of 5 ml of acetate buffer solution pH 6.0 R and 50 ml of water.
Iron: Dilute 5 ml of solution S to 10 ml with water. The solution complies with the limit test for iron (20 ppm).
Heavy metals: Dissolve 5.0 g in water and dilute to 20 ml with the same solvent. 12 ml of the solution complies with limit test A for heavy metals (4 ppm). Prepare the standard using lead standard solution (1 ppm Pb).
Sodium: Not more than 0.5 per cent of Na, determined by atomic emission
Loss on drying: Not more than 3.0 per cent, determined on 1.000 g by drying in an oven at 100C to 105C.
Potassium Acetate Analytical Reagent
CH3COOK
Formula Weight. 98.14
CAS Number 127-08-2
REQUIREMENTS
Assay: 99.0% CH3COOK
pH of a 5% solution: 6.5-9.0 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.003%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Sodium (Na): 0.03%
The Uses of Potassium Acetate:
Potassium Acetate is used to prevent and treat low levels of potassium in your body. Potassium acetate is used as a deicer to remove ice and stop its formation. It is used as a food preservative. It is also used as a catalyst to produce polyurethanes.
The MSDS-SDS Hazard Statement of Potassium Acetate:
Potassium Acetate SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 16-Jan-23
1. Product Identification
Product Name & Other Names: Potassium Acetate or Acetic acid, potassium salt.
CAS No.: 127-08-2
EINECS EC Number: 204-822-2
Molecular Weight: 98.15
Chemical Formula: KC2H3O2
Relevant uses and uses advised against (if any): Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling as per GHS & Regulation EC 1272/2008 (CLP) & GHS
GHS Label Elements NONE |
Signal Word: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Potassium Acetate or Acetic acid, potassium salt.
CAS No.: 127-08-2
EINECS EC Number: 204-822-2
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Do not induce vomiting. Loosen tight clothing. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Skin Contact: Wash exposed area with soap and water. Get medical advice if irritation develops.
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
5. Fire Fighting Measures
Fire: Potassium Acetate is not considered to be a fire hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Neutralize the residue with a dilute solution of acetic acid. Finish cleaning by spreading water on the contaminated surface and allow to drain as per law.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.
Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for this substance. However, if conditions of use create discomfort to the worker, a local exhaust system should be considered.
Personal Respirators (NIOSH Approved):
For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: Potassium Acetate is white, deliquescent, crystalline powder.
Odor: Odorless.
Odor threshold: Not available.
pH: 9.7 0.1M (solution) literature.
Relative density: 1.57 @ 25C literature.
Melting Point: 292C (558F).
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: 200 g/100 g water.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Potassium Acetate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: May produce oxides of carbon and the contained metal.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: Moisture, heat, flames, ignition sources and incompatibles.
11. Toxicological Information
Oral rat LD50: 3250 mg/kg
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. Ecological Information
Toxicity to fish: LC50 - Danio rerio (zebra fish) - > 992 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia - > 919 mg/l - 48 h
Toxicity to algae: EC50 - Skeletonema costatum - > 1.000 mg/l - 72 h
Environmental Fate: Readily biodegradable.
Bioaccumulative potential: Does not accumulate in organisms.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA/ICAO: Not controlled.
15. Regulatory Information
United States Regulatory Information:
SARA 311/312 Hazardous chemical: See section 2.
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Potassium Acetate Structure
CAS Number 127-08-2, Potassium Acetate Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 17-jan-23
We manufacture:
Glacial Acetic Acid Manufacturer