CAS Number 1336-21-6 or 7664-41-7, Ammonia Solution Concentrated or Ammonium Hydroxide Solution USP BP Ph Eur EP Reagent FCC Food Grade Manufacturers Exporters
------ 
CAS Number 1336-21-6 or 7664-41-7, Ammonia Solution Concentrated or Ammonium Hydroxide Solution USP BP Ph Eur EP Reagent FCC Food Manufacturer Exporter
For Properties Specifications of Ammonia Solution Concentrated or Ammonium Hydroxide Solution Click Properties, Specifications of Ammonia Solution Concentrated or Ammonium Hydroxide Solution Manufacturer.
For Uses of Ammonia Solution Concentrated or Ammonium Hydroxide Solution Click Uses of Ammonia Solution Concentrated or Ammonium Hydroxide Solution Manufacturer.
For For SDS MSDS Sheet of Ammonia Solution Concentrated or Ammonium Hydroxide Solution Click SDS Safety Data Sheet MSDS Sheet of Ammonia Solution Concentrated or Ammonium Hydroxide Solution Manufacturer.
The Properties and Specifications of Ammonia Solution Concentrated or Ammonium Hydroxide Solution:
General Properties and Specifications of Ammonium Hydroxide Solution or Ammonia Water or Ammoniacal Liquor:
Appearance: Colorless aqueous solution.
Odor: Typical pungent, suffocating odor.
Assay: up-to 30% in water as desired.
Ammonium Hydroxide Analytical Reagent Grade Specifications:
Aqueous Ammonia
NH4OH Formula Weight 35.05
CAS Number 1336-21-6
REQUIREMENTS
Appearance: Colorless and free from suspended matter or sediment.
Assay (as NH3): 28.0-30.0%
Residue after ignition: 0.002%
Carbon dioxide (CO2): 0.002%
Chloride (Cl): 0.5 ppm.
Phosphate (PO4): 2 ppm.
Nitrate (NO3): 2 ppm.
Sulfate (SO4): 2 ppm.
Heavy metals (as Pb): 0.5 ppm.
Iron (Fe): 0.2 ppm.
Substances reducing permanganate: Passes test.
Ammonia Solution FCC Food Grade Specifications:
Ammonium Hydroxide; Stronger Ammonia Water
NH3 Formula weight 17.03
INS: 527 CAS 7664-41-7
DESCRIPTION
Ammonia Solution occurs as a clear, colorless liquid. Upon exposure to air it loses ammonia rapidly. Its specific gravity is about 0.90.
Caution: Ammonia Solution is irritating to the oral mucosa and respiratory tract. Perform tests in a well-ventilated fume hood.
Function: pH control agent; surface finishing agent; boiler water additive.
REQUIREMENTS
Identification: Hold a glass rod wet with hydrochloric acid near the surface of the sample liquid. Dense, white fumes evolve.
Assay: Not less than 27.0% and not more than 30.0%, by weight, of NH3.
Lead: Not more than 0.5 mg/kg.
Nonvolatile Residue: Not more than 0.02%.
Readily Oxidizable Substances: Passes test.
We also supply Ammonia Solution Concentrated EP Grade.
The Uses of Ammonia Solution Concentrated or Ammonium Hydroxide Solution:
Ammonium Hydroxide Solution or Ammonia Water or Ammoniacal Liquor is a solution of ammonia in water. It is used as a food acidity regulator. It has E number of E527. It is used in manufacturing rayon and other textiles, pharmaceuticals, paper, rubber, detergents, inks, and other organic chemicals.
The MSDS-SDS Hazard Statement of Ammonia Solution Concentrated or Ammonium Hydroxide Solution:
Ammonium Hydroxide Solution or Ammonia Water or Ammoniacal Liquor
SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 23-Nov-24
1. Product Identification
Product Name & Other Names: Ammonium Hydroxide Solution or Ammonia Water or Ammoniacal Liquor.
CAS No.: 1336-21-6
EINECS EC Code: 215-647-6
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion (Category 1B), H314
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
Chronic aquatic toxicity (Category 1), H410
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements  Corrosive |
GHS Label Elements |
Signal Word: Danger
Hazard Statements:
H314: Causes severe skin burns and eye damage.
H335: May cause respiratory irritation.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statements
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash ... thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Ammonium Hydroxide Solution or Ammonia Water or Ammoniacal Liquor.
CAS No.: 1336-21-6
EINECS EC Code: 215-647-6
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, it will cause irritation and damage to the nose and throat. Remove the victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: It will cause irritation and burns to mouth, digestive tract and stomach. Contact the medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: On contact, it can cause itching, pain, swelling and redness. Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: It can cause severe damage to eyes. Check for and remove any contact lenses. Immediately flush your eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Toxic fumes, ammonia, nitrogen oxides, carbon dioxide and carbon monoxide may be formed in fire.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide or water jet.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Small Spill: Mop and pick up the material and place in an appropriate waste disposal container.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Avoid mist formation. Keep away from heat.Provide ventilation.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and strong acids. Keep away from heat and source of fire preferably in a ventilated area. Keep in tightly closed container. Do not breathe mist or dust. Avoid contact with Copper, Iron, Zinc.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Contains no substances with occupational exposure limit values.
Contains Ammonia: ACGIH TLV TWA: 25 ppm & STEL: 35 ppm
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron, or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full-face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Colorless aqueous solution.
Odor: Typical pungent, suffocating odor.
Odor threshold: No data found.
pH: No data found.
Relative density: No data found.
Melting point/freezing point: No data found.
Boiling Point: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Soluble in water.
Viscosity: No data found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Toxic fumes, ammonia, nitrogen oxides, carbon dioxide and carbon monoxide may be formed in fire.
Hazardous Polymerization: Not reported.
Incompatibilities: Strong acids, oxidizing, heat, and sparks.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles. Avoid contact with Copper, Iron, Zinc.
11. Toxicological Information
Harmful if swallowed; Causes severe skin burns and eye damage.
Oral rat LD50: = 350 mg/kg for ammonia.
Reproductive Effects: No data found.
Developmental Effects: No data found.
Teratogenicity: No data found.
Carcinogenicity: The product is not listed as carcinogen by OSHA, IARC, ACGIH or NTP.
12. Ecological Information
Environmental Toxicity: Very toxic to aquatic life with long lasting effects.
Toxicity to fish: flow-through test LC50 - Pimephales promelas (fathead minnow) - 0,068 mg/l - 96 h. Ammonia solution.
Results of PBT and vPvB assessment: No data found.
Persistence and degradability: Unlikely to persist due to water solubility.
Mobility in soil: Likely to be mobile due to water solubility.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Follow all the pollution control laws.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe
UN Number: 2672
Proper shipping name: Ammonia solution. Class: 8, Packing group: III.
IMO/IMDG & ICAO/IATA
UN Number: 2672
Proper shipping name: Ammonia solution. Class: 8, Packing group: III.
15. Regulatory Information
USA:
SARA 311/312: See section 2.
California Prop 65: Not listed.
Section 16 - Additional Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Ammonia Solution Concentrated or Ammonium Hydroxide Solution Structure
CAS Number 1336-21-6 or 7664-41-7, Ammonia Solution Concentrated or Ammonium Hydroxide Solution Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 25-nov-24
We manufacture:
Ammonia Solution Concentrated or Ammonium Hydroxide Solution