CAS Number 10101-89-0 Dodecahydrate, 7601-54-9 Anhydrous, Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous USP NF Analytical Reagent FCC Food Grade Manufacturers Exporters
------ 
CAS Number 10101-89-0 Dodecahydrate, 7601-54-9 Anhydrous, Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Manufacturer Exporter
For Properties Specifications of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Click Properties, Specifications of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Manufacturer.
For Uses of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Click Uses of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Manufacturer.
For For SDS MSDS Sheet of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Click SDS Safety Data Sheet MSDS Sheet of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Manufacturer.
The Properties and Specifications of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous:
Tribasic Sodium Phosphate USP NF Grade Specifications
Tribasic Sodium Phosphate
Na3PO4 (anhydrous) 163.94
Phosphoric acid, trisodium salt, dodecahydrate.
Trisodium phosphate, dodecahydrate 380.13 CAS 10101-89-0
Trisodium phosphate, monohydrate 181.96
Anhydrous CAS 7601-54-9
Tribasic Sodium Phosphate is anhydrous or contains one to twelve molecules of water of hydration. Na3PO4 (anhydrous) and Na3PO4·H2O (monohydrate) contain not less than 97.0 percent of Na3PO4, calculated on the ignited basis; Na3PO4-12H2O (dodecahydrate) contains not less than 92.0 percent of Na3PO4, calculated on the ignited basis.
Identification: A solution (1 in 20) meets the requirements of the tests for Sodium and for Phosphate.
Loss on ignition: Dry a portion at 100 for 5 hours. Ignite about 2 g, accurately weighed, of the dried sample at about 800 for 30 minutes: calculated on the dried basis, the anhydrous form loses not more than 2.0% of its weight, the monohydrate loses between 8.0% and 11.0% of its weight, and the dodecahydrate loses between 45.0% and 57.0% of its weight.
Insoluble substances: Dissolve a portion equivalent to 10.0 g of anhydrous tribasic sodium phosphate in 100 mL of hot water, and filter through a tarred filtering crucible. [NOTE—Do not use glass.] Wash the insoluble residue with hot water, and dry at 105 for 2 hours: the weight of the residue so obtained does not exceed 20 mg (0.2%).
Arsenic: 3 µg per g.
Heavy metals: 0.001%.
Sodium Phosphate Tribasic FCC Food Grade Specifications
Trisodium Phosphate
Na3PO4 Formula wt, anhydrous 163.94
Na3PO4·12H2O Formula wt, dodecahydrate 380.12
INS: 339(iii) CAS: anhydrous 7601-54-9
CAS: dodecahydrate 10101-89-0
DESCRIPTION
Sodium Phosphate, Tribasic, occurs as white crystals or granules or as a crystalline material. It may be anhydrous or contain 1 to 12 molecules of water of hydration. The formula for a crystalline material is approximately 4(Na3PO4·12H2O)- NaOH. It is freely soluble in water, but is insoluble in alcohol. The pH of a 1:100 aqueous solution is between 11.5 and 12.5.
Function: Antimicrobial; buffer; emulsifier; nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Sodium and for Phosphate.
Assay: Anhydrous and Monohydrate: Not less than 97.0% of Na3PO4, calculated on the ignited basis; Dodecahydrate: Not less than 90.0% of Na3PO4, calculated on the ignited basis.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 4 mg/kg.
Loss on Ignition Anhydrous: Not more than 2.0%; Monohydrate: Between 8.0% and 11.0%; Dodecahydrate: Between 45.0% and 57.0%.
Sodium Phosphate Tribasic Dodecahydrate Analytical Reagent
Na3PO4-12H2O
Formula Weight 380.12
CAS Number 10101-89-0
NOTE. This salt, when stored under ordinary conditions, may lose some water of crystallization. Any loss in water will result in an assay of more than 100% Na3PO4-12H2O but does not affect the determination of the relative amount of free alkali present.
REQUIREMENTS
Assay: 98.0-102.0% Na3PO4-12H2O
MAXIMUM ALLOWABLE
Excess alkali (as NaOH): 2.5%
Insoluble matter: 0.01%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Sulfate (SO4): 0.01%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
The Uses of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous:
Trisodium phosphate is used as a detergent in households, laundries, factories, hotels, dairies, and garages. It is used as a water softener and boiler compound because of its ability to precipitate calcium and magnesium phosphates. It has many other miscellaneous uses. It is used as a cleaning agent, builder, lubricant, food additive, stain remover, and degreaser. Trisodium phosphate and other sodium phosphate additives have multiple uses in the food industry and are found in many commercially prepared products. It's E-number is E339 for use in food.
The MSDS-SDS Hazard Statement of Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous:
Trisodium Phosphate SDS, Safety Data Sheet
MSDS Material Safety Data Sheet Sodium Phosphate Tribasic 27-Jan-23
1. Product Identification
Product Name & Other Names: Trisodium phosphate 12-Hydrate or Sodium phosphate tribasic or Phosphoric acid trisodium salt or Dodecahydrate trisodium Phosphate.
CAS No.: 7601-54-9 (Anhydrous) 10101-89-0 (Dodecahydrate)
EINECS EC Number: 231-509-8
Molecular Weight: 163.94 for Anhydrous and 380.12 for Dodecahydrate
Chemical Formula: Na3PO4 for Anhydrous and Na3PO4-12H2O for Dodecahydrate
Relevant uses and uses advised against (if any): Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Specific target organ toxicity - single exposure, Target Organs - Respiratory system. Category 3, H335
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
Signal Words: Warning
Hazard statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
3. Composition/Information on Ingredients
Product Name & Other Names: Trisodium phosphate 12-Hydrate or Sodium phosphate tribasic or Phosphoric acid trisodium salt or Dodecahydrate trisodium Phosphate.
CAS No.: 7601-54-9
EINECS EC Number: 231-509-8
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do NOT induce vomiting. Give large amounts of water. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire: Not considered to be a fire hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use means suitable for extinguishing surrounding.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind..
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Trisodium phosphate or Tri Sodium Phosphate:
AIHA Workplace Environmental Exposure Limit: 5 mg/m3 (15-minute STEL)
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded and engineering controls are not feasible, a full face piece respirator with high efficiency particulate filter (NIOSH type N100 filter).
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: White crystalline solid.
Odor: Odorless.
Odor threshold: Not available.
pH: Strongly alkaline.
Relative density: around 1.62
Boiling Point: Decomposes.
Melting Point: 73.3 - 76.7C (163 - 171F)
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Appreciable (> 10%)
Viscosity: Not available.
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Sodium and phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur for Tri Sodium Phosphate.
Incompatibilities: Trisodium Phosphate reacts violently with water and acids to liberate heat.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.
11. Toxicological Information
Toxicity to Animals: Trisodium Phosphate, Dodecahydrate: 7400 mg/kg oral rat LD50.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC NTP ACGIH OSHA.
Mutagenic Effects: Investigated as a mutagen.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. Ecological Information
Toxicity to fish: No information available.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IATA/ICAO & IMDG/IMO: Not controlled.
15. Regulatory Information
USA:
California Proposition 65: Not listed.
SARA 311/312: See section 2.
16. Other Information
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Structure
CAS Number 10101-89-0 Dodecahydrate, 7601-54-9 Anhydrous, Trisodium Phosphate or Sodium Phosphate Tribasic Dodecahydrate Monohydrate Anhydrous Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 27-jan-23
We manufacture:
Glacial Acetic Acid Manufacturer
Hydrated Manganese Glycerophosphate