CAS Number 7778-53-2 Anhydrous; 22763-02-6 Heptahydrate, Tripotassium Phosphate or Potassium Phosphate Tribasic Analytical Reagent FCC Food Grade Manufacturers Exporters
------ 
CAS Number 7778-53-2 Anhydrous; 22763-02-6 Heptahydrate, Tripotassium Phosphate or Potassium Phosphate Tribasic Manufacturer Exporter
For Properties Specifications of Tripotassium Phosphate or Potassium Phosphate Tribasic Click Properties, Specifications of Tripotassium Phosphate or Potassium Phosphate Tribasic Manufacturer.
For Uses of Tripotassium Phosphate or Potassium Phosphate Tribasic Click Uses of Tripotassium Phosphate or Potassium Phosphate Tribasic Manufacturer.
For For SDS MSDS Sheet of Tripotassium Phosphate or Potassium Phosphate Tribasic Click SDS Safety Data Sheet MSDS Sheet of Tripotassium Phosphate or Potassium Phosphate Tribasic Manufacturer.
The Properties and Specifications of Tripotassium Phosphate or Potassium Phosphate Tribasic:
Potassium Phosphate, Tribasic FCC Food Grade Specifications
Tripotassium Phosphate FCC Food Grade Specifications
Tribasic Potassium Phosphate FCC Food Grade Specifications
K3PO4 Formula weightt 212.27
INS: 340(iii) CAS Number 7778-53-2
DESCRIPTION
Potassium Phosphate, Tribasic, occurs as white, hygroscopic crystals or granules. It is anhydrous or may contain one molecule of water of hydration. It is freely soluble in water, but is insoluble in alcohol. The pH of a 1:100 aqueous solution is about 11.5.
Function: Emulsifier.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Potassium and for Phosphate.
Assay: Not less than 97.0% of K3PO4, calculated on the ignited basis.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 10 mg/kg.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 2 mg/kg.
Loss on Ignition Anhydrous: Not more than 5.0%; Monohydrate: Between 8.0% and 20.0%.
Potassium Phosphate Tribasic Analytical Reagent Food Grade Specifications
Tripotassium Orthophosphate Specifications
Tripotassium Phosphate Analytical Reagent
Tribasic Potassium Phosphate Analytical Reagent
K3PO4
Formula Weight 212.27
K3PO4-7H2O
Formula Weight 338.38
CAS Number 7778-53-2 anhydrous; 22763-02-6 heptahydrate
REQUIREMENTS
Assay (as-is basis): 98% K3PO4 or K3PO4-7H2O
MAXIMUM ALLOWABLE
Dibasic potassium phosphate (K2HPO4) 1%
Excess alkali (as KOH): 1%
Insoluble matter: 0.01%
Chloride (Cl): 0.005%
Nitrogen compounds (as N): 0.002%
Heavy Metals (as Pb): 0.002%
Iron (Fe): 0.001%
Sulfate (SO4): 0.005%
Sodium (Na): 0.1%.
The Uses of Tripotassium Phosphate or Potassium Phosphate Tribasic:
Potassium phosphate tribasic is a reagent with a very high buffering capacity. It is widely used in molecular biology, biochemistry, and chromatography. Tripotassium phosphate (K3PO4) is used as a food additive for its properties as an emulsifier, foaming agent, and whipping agent.
The MSDS-SDS Hazard Statement of Tripotassium Phosphate or Potassium Phosphate Tribasic:
Tripotassium Phosphate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet Potassium Phosphate Tribasic 17-Jan-23
1. Product Identification
Product Name & Other Names: Tripotassium Phosphate or Potassium Phosphate Tribasic or Phosphoric acid tripotassium salt or Tri Potassium Phosphate.
CAS No.: 7778-53-2
EINECS EC Number: 231-907-1
Molecular Weight: 212.27 (Anhydrous)
Chemical Formula: K3PO4-nH2O
Relevant uses and uses advised against (if any): Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, oral Category 5, H303
Skin corrosion/irritation Category 1A, B, C, H314
Acute toxicity, inhalation Category 5, H333
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Corrosive |
Signal Words: Danger
Hazard statements:
H303: May be harmful if swallowed
H314: Causes severe skin burns and eye damage.
H333: May be harmful if inhaled.
Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P337+P313: If eye irritation persists: Get medical advice/ attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Tripotassium Phosphate or Potassium Phosphate Tribasic or Phosphoric acid tripotassium salt or Tri Potassium Phosphate.
CAS No.: 7778-53-2
EINECS EC Number: 231-907-1
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire: Not considered to be a fire hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire for Tri Potassium Phosphate.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and acids.
8. Exposure Controls/Personal Protection
Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible to Tripotassium Phosphate.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist of Tripotassium Phosphate is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: White powder.
Odor: Odorless.
Odor threshold: Not available.
pH: Strongly alkaline.
Relative density: around 2.56
Melting Point: ca. 1340C (ca. 2444F).
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble 50 grams in 100 grams of water.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acidic materials.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
LD50 Oral - Rat - male and female - 4.260 mg/kg
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. Ecological Information
Toxicity to fish: No information available.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA/ICAO: Not controlled.
15. Regulatory Information
USA:
SARA 311/312: Acute: See section 2.
California Prop. 65 Components: Not listed.
16. Other Information
Section 16: Other Information
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Tripotassium Phosphate or Potassium Phosphate Tribasic Structure
CAS Number 7778-53-2 Anhydrous; 22763-02-6 Heptahydrate, Tripotassium Phosphate or Potassium Phosphate Tribasic Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 17-jan-23
We manufacture:
Glacial Acetic Acid Manufacturer
Calcium Gluceptate or Calcium Glucoheptonate