CAS Number 29039-00-7 and 17140-60-2, Calcium Gluceptate or Calcium Glucoheptonate USP BP Ph Eur Grade Manufacturers Exporters

Home ------ Contact Anmol Chemicals Industries

Chemical Exporter Air Cargo JarPacked Chemicals Pail for Chemicals Carboys Jumbo packing

Calcium Gluceptate or Calcium Glucoheptonate Manufacturers Exporters
CAS Number 29039-00-7 and 17140-60-2, Calcium Gluceptate or Calcium Glucoheptonate Manufacturer Exporter

For Properties Specifications of Calcium Gluceptate or Calcium Glucoheptonate Click Properties, Specifications of Calcium Gluceptate or Calcium Glucoheptonate Manufacturer.

For Uses of Calcium Gluceptate or Calcium Glucoheptonate Click Uses of Calcium Gluceptate or Calcium Glucoheptonate Manufacturer.

For For SDS MSDS Sheet of Calcium Gluceptate or Calcium Glucoheptonate Click SDS Safety Data Sheet MSDS Sheet of Calcium Gluceptate or Calcium Glucoheptonate Manufacturer.

The Properties and Specifications of Calcium Gluceptate or Calcium Glucoheptonate:

Calcium Gluceptate USP Grade Specifications
C14H26CaO16 (anhydrous) -- 490.42
Glucoheptonic acid, calcium salt (2:1).
Calcium glucoheptonate (1:2) -- CAS 29039-00-7

Calcium Gluceptate is anhydrous or contains varying amounts of water of hydration. It consists of the calcium salt of the alpha epimer of glucoheptonic acid or of a mixture of the alpha and beta epimers of glucoheptonic acid. It contains not less than 95.0 percent and not more than 102.0 percent of C 14H26CaO16, calculated on the dried basis.

Labeling: Label it to indicate whether it is hydrous or anhydrous; if hydrous, label it to indicate also the degree of hydration.

Identification:
A: Infrared Absorption 197K.
B: A solution (1 in 50) responds to the tests for Calcium 191 .
pH: between 6.0 and 8.0, in a solution (1 in 10).
Loss on drying: [NOTE—The quantity taken for the determination may be adjusted, if necessary, for instrument sensitivity. Weight loss occurring at temperatures above about 160 degree indicative of decomposition, is not to be interpreted as Loss on drying.] Determine the percentage of volatile substances by thermogravimetric analysis on an appropriately calibrated instrument, using 10 to 25 mg of Calcium Gluceptate accurately weighed. Heat the specimen under test at a rate of 5 degrees per minute in an atmosphere of nitrogen, at a flow rate of 40 mL per minute. Record the thermogram to 150 degree: the anhydrous form loses not more than 1.0%, the 2H2O form not more than 6.9%, and the 3½H2O form not more than 11.4%, of its weight.
Chloride: A 1.0-g portion shows no more chloride than corresponds to 1.0 mL of 0.020 N hydrochloric acid (0.07%).
Sulfate: A 2.0-g portion shows no more sulfate than corresponds to 1.0 mL of 0.020 N sulfuric acid (0.05%).
Heavy metals: Dissolve 1 g in 25 mL of water: the limit is 0.002%.
Reducing sugars: Dissolve 0.50 g in 10 mL of hot water, add 2 mL of 3 N hydrochloric acid, boil for about 2 minutes, and cool. Add 5 mL of sodium carbonate, allow to stand for 5 minutes, dilute with water to 20 mL, and filter. Add 5 mL of the clear filtrate to about 2 mL of alkaline cupric tartrate and boil for 1 minute: no red precipitate is formed immediately.


Calcium Glucoheptonate BP Ph Eur Grade Specifications
Ph Eur
C14H26CaO16 -- 490.4 -- CAS 29039-00-7
Action and use: Used in treatment of calcium deficiency.

DEFINITION
Mixture in variable proportions, of calcium di(D-glycero-D-gulo-heptonate) and calcium di (D-glycero-D-ido-heptonate).
Content: 98.0 per cent to 102.0 per cent of calcium 2,3,4,5,6,7-hexahydroxyheptanoate (dried substance).

CHARACTERS
Appearance: White or very slightly yellow, amorphous powder, hygroscopic.
Solubility: Very soluble in water, practically insoluble in acetone and in ethanol (96 per cent).

IDENTIFICATION
A. Thin-layer chromatography.
B. 0.2 ml of (see Tests) gives reaction (b) of calcium.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
pH: 6.0 to 8.0 for solution S.
Reducing sugars: Maximum 1 per cent, expressed as glucose.
Cyanide: To pass the test.
Chlorides: Maximum 100 ppm.
Sulphates: Maximum 100 ppm, determined on solution S.
Iron: Maximum 40 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 5.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3 h.
Bacterial endotoxins: Less than 167 IU/g, if intended for use in the manufacture of parenteral dosage forms without a further appropriate procedure for the removal of bacterial endotoxins.


The Uses of Calcium Gluceptate or Calcium Glucoheptonate:
Calcium glucoheptonate is a calcium supplement combined with calcium gluconate and used to treat hypocalcemia and maintain calcium levels. Calcium Gluceptate is used to prevent or treat several conditions that may cause hypocalcemia (not enough calcium in the blood).


The MSDS-SDS Hazard Statement of Calcium Gluceptate or Calcium Glucoheptonate:

Calcium Gluceptate or Calcium Glucoheptonate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
 07-Jan-23

Section 1: Chemical Product and Company Identification

Product Name & Other Names: Calcium gluceptate or Calcium glucoheptonate or Glucoheptonic acid, calcium.
CAS Number: 29039-00-7 (also quoted is 17140-60-2)
EINECS EC Code: --
Chemical Formula: C14H26CaO16.
Molecular Weight: 490.42
Relevant uses and uses advised against (if any): Industrial Manufacturing

Section 2: Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
NONE

Signal Word: None

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Section 3: Composition and Information on Ingredients

Product Name & Other Names: Calcium gluceptate or Calcium glucoheptonate or Glucoheptonic acid, calcium.
CAS Number: 29039-00-7 (also 17140-60-2)

Section 4: First Aid Measures

Always seek medical advice after the first aid treatment.

Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Notes to Physician: Treat symptomatically.

Section 5: Fire and Explosion Data

Flammability of the Product: Like all organic substances it can catch fire at elevated temperature.
Products of Combustion: Calcium oxide, Fumes and Oxides of carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.

Section 6: Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Section 7: Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, bases, amines, reducing agents, acids, acid anhydrides.

Section 8: Exposure Controls/Personal Protection

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Section 9: Physical and Chemical Properties

Appearance: Solid
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature : 200C
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in cold water.
Viscosity: Not available.

Section 10: Stability and Reactivity Data

Stability: It is stable.
Conditions of instability: Incompatible materials
Incompatibility with various substances: Heat, light, strong oxidizing agents, bases, amines, reducing agents, acids, acid anhydrides.
Polymerization: Will not occur.

Section 11: Toxicological Information

Toxicity to Animals: Not available.
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Section 12: Ecological Information

Ecotoxicity: The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment. Not dangerous for the ozone layer.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

Section 13: Disposal Considerations

Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations.

Section 14: Transport Information

DOT USA & ADR/RID Europe: Not controlled.
IMDG: Not controlled.
IATA: Not controlled.

Section 15: Other Regulatory Information

USA Federal and State Regulations:
No further data available.

Section 16 - Additional Information

Disclaimer:
*****************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
*****************************

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.

Calcium Gluceptate or Calcium Glucoheptonate Suppliers
Calcium Gluceptate or Calcium Glucoheptonate Structure

CAS Number 29039-00-7 and 17140-60-2, Calcium Gluceptate or Calcium Glucoheptonate Manufacturer Exporter

ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA

e-mail: info(At the rate i.e. @)anmol.org

Copyright. 8-jan-23

We manufacture:

Glacial Acetic Acid Manufacturer

Ammonium Persulfate Exporter

Boric Acid

Calcium Acetate

Calcium Borogluconate

Calcium Butyrate

Calcium Carbonate

Calcium Chloride

Calcium Citrate

Calcium Fructoborate

Calcium Glubionate

Calcium Gluconate

Calcium Gluceptate or Calcium Glucoheptonate

Calcium Glycerophosphate

Calcium Lactobionate

Calcium Saccharate Supplier

Carbamide Peroxide

Chromic Chloride

Formaldehyde Solution

Lithium Carbonate

Magnesium Chloride

Potassium Aluminium Sulfate

Selenious Acid

Sodium Selenite

Sodium Formate

Vanadyl Sulfate