CAS Number ---, Strontium Chloride Hexahydrate Anhydrous GMP Grade Manufacturers Exporters

Home ------ Contact Anmol Chemicals Industries

Chemical Exporter Air Cargo JarPacked Chemicals Pail for Chemicals Carboys Jumbo packing

Strontium Chloride Hexahydrate Anhydrous Manufacturers Exporters
CAS Number ---, Strontium Chloride Hexahydrate Manufacturer Exporter

For Properties Specifications of Strontium Chloride Hexahydrate Anhydrous Click Properties, Specifications of Strontium Chloride Hexahydrate Anhydrous Manufacturer.

For Uses of Strontium Chloride Hexahydrate Anhydrous Click Uses of Strontium Chloride Hexahydrate Anhydrous Manufacturer.

For For SDS MSDS Sheet of Strontium Chloride Hexahydrate Anhydrous Click SDS Safety Data Sheet MSDS Sheet of Strontium Chloride Hexahydrate Anhydrous Manufacturer.

The Properties and Specifications of Strontium Chloride Hexahydrate Anhydrous:

Strontium Chloride Hexahydrate Analytical Reagent Grade
SrCl2- 6H2O: Formula Weight 266.62
CAS Number 10025-70-4

Assay: 99.0-103.0% SrCl2 . 6H2O
pH of a 5% solution: 5.0-7.0 at 25C

Insoluble matter: 0.005%
Sulfate (SO4): 0.001%
Barium (Ba): 0.05%
Calcium (Ca): 0.05%
Magnesium (Mg): 2 ppm
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm.

We also supply Strontium Chloride Anhydrous.

The Uses of Strontium Chloride Hexahydrate Anhydrous:
Strontium Chloride is used in the treatment of hypersensitivity, inflammation of gums and dental cavities. Strontium Chloride is an antibacterial medication. It works by strengthening the teeth and reducing the effects of acid and bacteria on the teeth. Strontium chloride is a medication used to treat bone pain in skeletal metastases. Strontium Chloride is used for the prevention and treatment of dental cavities or dental decay and gum inflammation.

The MSDS-SDS Hazard Statement of Strontium Chloride Hexahydrate Anhydrous:

Strontium Chloride Hexahydrate & Anhydrous SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Product Name & Other Names: Strontium Chloride.
CAS No.: 10025-70-4 for Hexahydrate and 10476-85-4 for Anhydrous
EINECS: EC Number: 233-971-6
Molecular Weight: 158.52 for Hexahydrate and 266.6 for Anhydrous
Chemical Formula: SrCl2.6H2O (Strontium Chloride Hexahydrate) and SrCl2 for Anhydrous
Relevant uses and uses advised against (if any): Industrial Manufacturing.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements

Signal Words: Warning

Hazard statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.

Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.

3. Composition/Information on Ingredients

Product Name & Other Names: Strontium Chloride.
CAS No.: 10025-70-4 for Hexahydrate and 10476-85-4 for Anhydrous
EINECS: EC Number: 233-971-6

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.

5. Fire Fighting Measures

Flammability of the Product: Non-flammable.
Products of Combustion: Strontium Oxide and Chlorine or Hydrogen Chloride.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, bromine trifluoride, 2 -furan percarboxylic acid. Moist strontium chloride and concentrated solutions can corrode steel. When exposed to the atmosphere, it will absorb water and form a solution.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

9. Physical and Chemical Properties

Appearance: White crystals or powder or granules.
Odor: It is odorless.
Odor threshold: Not available.
pH: 5.0 - 7.0 at 50 g/l at 25C (77F)
Relative density: Not available.
Boiling Point: 1250C after losing water
Melting Point: 875C after losing water
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is freely soluble in water.
Viscosity: Not available.

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits toxic chlorine fumes when heated to decomposition. It may form strontium oxide and hydrogen chloride and chlorine.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, bromine trifluoride, 2 -furan percarboxylic acid.
Conditions to Avoid
: Incompatibles.

11. Toxicological Information

Toxicity data for anhydrous material
ORL-RAT LD50 2250 mg kg-1
ORL-MOUSE LD50 1036 mg kg-1
Carcinogenic Effects: Not known to be carcinogenic.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.

12. Ecological Information

Toxicity to fish: No information available.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA/ICAO: Not controlled.

15. Regulatory Information

SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

16. Other Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.

Strontium Chloride Hexahydrate Anhydrous Suppliers
Strontium Chloride Hexahydrate Anhydrous Structure

CAS Number ---, Strontium Chloride Hexahydrate Anhydrous Manufacturer Exporter

India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA

e-mail: info(At the rate i.e. @)

Copyright. 31-jan-23

We manufacture:

Glacial Acetic Acid Manufacturer

Aluminum Chloride Anhydrous

Aluminum Chloride Hexahydrate Anhydrous

Aluminum Chlorohydrate Solution Powder

Calcium Chloride

Calcium Saccharate Supplier

Chromic Chloride

Cobalt Chloride

Copper Chloride, Cupric Chloride, Cuprous Chloride

Ferric Chloride Anhydrous Hexahydrate

Formaldehyde Solution

Magnesium Chloride

Magnesium Trisilicate

Maleic Acid

Malic Acid

Myristic Acid

Potassium Bromide

Potassium Chloride

Potassium Monopersulfate

Sodium Chloride

Sodium Metabisulfite

Sodium Stibogluconate

Sodium Sulfide Nonahydrate

Sodium Thiosulfate

Sodium Tartrate

Sodium Sulfide Nonahydrate

Sorbic Acid

Stannous Chloride

Strontium Acetate

Strontium Chloride

Strontium Citrate

Succinic Acid

Sucrose Acetate Isobutyrate

Tartaric Acid

TBHQ Tertiary Butylhydroquinone


Triethyl Citrate

Zinc Carbonate

Zinc Citrate

Zinc Chloride

Zinc Gluconate

Zinc Sulfate

Zinc Undecylenate or Zinc Undecenoate

Vanadyl Sulfate