CAS Number 6485-39-8, Manganese Gluconate USP FCC Food Grade Manufacturers Exporters

Home ------ Contact Anmol Chemicals Industries

Chemical Exporter Air Cargo JarPacked Chemicals Pail for Chemicals Carboys Jumbo packing

Manganese Gluconate Manufacturers Exporters
CAS Number 6485-39-8, Manganese Gluconate Manufacturer Exporter

For Properties Specifications of Manganese Gluconate Click Properties, Specifications of Manganese Gluconate Manufacturer.

For Uses of Manganese Gluconate Click Uses of Manganese Gluconate Manufacturer.

For For SDS MSDS Sheet of Manganese Gluconate Click SDS Safety Data Sheet MSDS Sheet of Manganese Gluconate Manufacturer.

The Properties and Specifications of Manganese Gluconate:

Manganese Gluconate USP Grade Specifications
C12H22MnO14 (anhydrous) --- 445.23
Bis(D-gluconato-O1,O2) manganese.
Manganese D-gluconate (1:2).
Dihydrate --- 481.27

Manganese Gluconate is dried or contains two molecules of water of hydration. It contains not less than 98.0 percent and not more than 102.0 percent of C12H22MnO14, calculated on the anhydrous basis.

Identification
A: A solution (1 in 20) responds to the tests for Manganese.
B: Chromatographic plate test.
Water: Where labeled as the dried form: between 3.0% and 9.0%, the determination being performed by stirring the mixture containing the Test preparation, maintained at a temperature of 50 , for 30 minutes before titrating with the Reagent. Where labeled as the dihydrate: it is between 6.0% and 9.0%.
Chloride: A 1.0-g portion shows no more chloride than corresponds to 0.70 mL of 0.020 N hydrochloric acid (0.05%).
Sulfate: A 2.0-g portion shows no more sulfate than corresponds to 4.0 mL of 0.020 N sulfuric acid (0.2%).
Limit of lead: To pass the test (0.001%).
Heavy metals: the limit is 20 @g per g.
Reducing substances: the limit is 1.0%.


Manganese Gluconate FCC Food Grade Specifications
C12H22MnO14-2H2O Formula weight, dihydrate 481.27
C12H22MnO14 Formula weight, anhydrous 445.24
CAS 6485-39-8

DESCRIPTION
Manganese Gluconate occurs as a slightly pink powder. The anhydrous form is obtained by spray-drying, and the dihydrate is obtained by crystallization. It is very soluble in hot water and is very slightly soluble in alcohol.

Function: Nutrient.

REQUIREMENTS

Identification:
A. A 1:20 aqueous solution gives positive tests for Manganese.
B: Chromatographic plate test.
Assay: Not less than 98.0% and not more than 102.0% of C12H22MnO14, calculated on the anhydrous basis.
Arsenic: Not more than 3 mg/kg.
Lead: Not more than 2 mg/kg.
Reducing Substances: Not more than 1.0%.
Water: Anhydrous: Between 3.0% and 9.0%; Dihydrate: Between 6.0% and 9.0%.


The Uses of Manganese Gluconate:
Manganese gluconate is a direct ingredient in food substances as a nutrient supplement. In pharmaceutical preparations it is used as a Manganese supplement. Manganese gluconate is sometimes used as a food additive for its texture and light pink coloring.


The MSDS-SDS Hazard Statement of Manganese Gluconate:

Manganese Gluconate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
 13-Jan-23

Section 1: Chemical Product and Company Identification

Product Name & Other Names: Manganese Gluconate
Synonym:
 D-Gluconic Acid, Manganese salt or Gluconic Acid, Manganese salt or Bis(ed-glulconato-O1,O2)manganese.
Chemical Formula: C12H22MnO14 · xH2O
Molecular Weight: 445.24
CAS Number: 6485-39-8
EINECS EC Code: 229-350-4
Relevant uses and uses advised against (if any): Industrial Manufacturing.

Section 2: Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
NONE

Signal Word: None

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
clothing. Rinse skin with water/shower.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Section 3: Composition and Information on Ingredients

Product Name & Other Names: Manganese Gluconate
Synonym:
 D-Gluconic Acid, Manganese salt or Gluconic Acid, Manganese salt or Bis(ed-glulconato-O1,O2)manganese.
CAS Number: 6485-39-8
EINECS EC Code: 229-350-4

Section 4: First Aid Measures

Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Notes to Physician: Treat symptomatically.

Section 5: Fire and Explosion Data

Flammability of the Product: Non-flammable.
Products of Combustion: Manganese oxide, Fumes and Oxides of carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Section 6: Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale vapors, mist, or gas. Avoid dust formation. Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.

Section 7: Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, bases, amines, reducing agents, acids, acid anhydrides.

Section 8: Exposure Controls/Personal Protection

Exposure Limits: USA OSHA PEL (TWA) (mg/m³) 15 mg/m³-Total Dust - 5 mg/m³-Respirable Dust.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Section 9: Physical and Chemical Properties

Physical state and appearance: Solid pinkish powder or granules.
Odor: Odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: around 1.25
Melting Point: Decomposes before melting.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Soluble in water.
Viscosity: Not available.

Section 10: Stability and Reactivity Data

Stability: It is stable.
Conditions of instability: Incompatible materials
Incompatibility with various substances: Heat, light, strong oxidizing agents, bases, amines, reducing agents, acids, acid anhydrides.
Hazardous decomposition products: Fumes, Carbon oxides & Manganese oxides are expected.
Polymerization: Will not occur.

Section 11: Toxicological Information

Toxicity to Animals: Acute oral toxicity (LD50): 5850 mg/kg [Rat].
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Section 12: Ecological Information

Ecotoxicity: The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment. Not dangerous for the ozone layer.
Toxicity to fish: No information available.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

Section 13: Disposal Considerations

Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations.

Section 14: Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA: Not controlled.

Section 15: Other Regulatory Information

USA Federal and State Regulations:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Section 16 - Additional Information

DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.

Manganese Gluconate Suppliers
Manganese Gluconate Structure

CAS Number 6485-39-8, Manganese Gluconate Manufacturer Exporter

ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA

e-mail: info(At the rate i.e. @)anmol.org

Copyright. 19-nov-24

We manufacture:

Glacial Acetic Acid Manufacturer

Ammonium Persulfate Exporter

Boric Acid

Calcium Borogluconate

Calcium Fructoborate

Calcium Glubionate

Calcium Gluconate

Calcium Gluceptate or Calcium Glucoheptonate

Calcium Glycerophosphate

Calcium Lactate

Calcium Lactate Gluconate

Calcium Lactobionate

Calcium Levulinate

Calcium Magnesium Lactate Gluconate

Calcium Phospholactate

Calcium Propionate

Calcium Saccharate Supplier

Calcium Sucrose Phosphate

Carbamide Peroxide

Chromic Chloride

Copper Gluconate

Gluconolactone

Glucuronolactone

Glutaraldehyde

Hyaluronic Acid

Iron Sucrose

Lactic Acid

Lactobionic Acid

Levofloxacin

Lithium Carbonate

Magnesium Acetate

Magnesium Borogluconate

Magnesium Butyrate

Magnesium Chloride

Magnesium Citrate

Magnesium Gluconate

Magnesium Glycerophosphate

Magnesium Lactate

Manganese Borogluconate

Manganese Chloride

Manganese Gluconate

Hydrated Manganese Glycerophosphate

Manganese Sulfate

Potassium Aluminium Sulfate

Selenious Acid

Sodium Selenite

Sodium Formate

Teriflunomide

Vanadyl Sulfate.