CAS Number 4075-81-4, Calcium Propionate USP NF FCC Food Grade Manufacturers Exporters
------ 
CAS Number 4075-81-4, Calcium Propionate Manufacturer Exporter
For Properties Specifications of Calcium Propionate Click Properties, Specifications of Calcium Propionate Manufacturer.
For Uses of Calcium Propionate Click Uses of Calcium Propionate Manufacturer.
For For SDS MSDS Sheet of Calcium Propionate Click SDS Safety Data Sheet MSDS Sheet of Calcium Propionate Manufacturer.
The Properties and Specifications of Calcium Propionate:
Calcium Propionate USP NF Grade Specifications:
C6H10CaO4 186.22 --- CAS 4075-81-4
DEFINITION
Calcium Propionate contains NLT 98.0% and NMT 100.5% of calcium propionate (C6H10CaO4), calculated on the anhydrous basis.
IDENTIFICATION
A. A solution of Calcium Propionate (1 in 20) imparts a transient yellowish red color to a nonluminous flame.
Limit of Lead: NMT 2 µg/g
Magnesium (as MgO): To pass the test. (about 0.4%).
Water-Insoluble Substances: NMT 0.2%
pH: 7.5 to 10.5, in a solution (1 in 10)
Water Determination: NMT 5.0%
Loss on Drying: NMT 4%
Calcium Propionate FCC Food Grade:
(CH3CH2COO)2Ca
C6H10CaO4 Formula weight 186.22
INS: 282 CAS: 4075-81-4
DESCRIPTION
Calcium Propionate occurs as white crystals or as a crystalline solid. The pH of a 1:10 aqueous solution is between 7.5 and 10.5. One-gram dissolves in about 3 mL of water.
Function: Preservative; mould inhibitor.
REQUIREMENTS
Identification:
A. A 1:20 aqueous solution gives positive tests for Calcium.
B. Upon ignition at a relatively low temperature, a sample yields an alkaline residue that effervesces with acids.
Assay: Not less than 98.0% and not more than 100.5% of C6H10CaO4, calculated on the anhydrous basis.
Fluoride: Not more than 0.003%.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 2 mg/kg.
Magnesium (as MgO): Passes test (about 0.4%).
Water: Not more than 5.0%.
The Uses of Calcium Propionate:
Calcium propionate is used as a preservative in a wide variety of products. Calcium propionate serves to mitigate a costly issue in the baking industry: mold and bacterial growth. As a food additive, it is used to extend the shelf life of various goods in a wide variety of products, including but not limited to: bread, other baked goods, processed meat, whey, and other dairy products. In agriculture, it is used, amongst other things, to prevent milk fever in cows and as a feed supplement. It is listed as a food additive with E number 282.
The MSDS-SDS Hazard Statement of Calcium Propionate:
Calcium Propionate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 08-Jan-23
1. Product Identification
Product Name & Other Names: Calcium propionate or Propionic acid, calcium salt or Calcium dipropionate.
CAS No.: 4075-81-4
EINECS, EC Number: 223-795-8
Molecular Weight: 186.22
Chemical Formula: (CH3CH2COO)2Ca
Relevant uses and uses advised against (if any): Laboratory and Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
3. Composition/Information on Ingredients
Product Name & Other Names: Calcium propionate or Propionic acid, calcium salt or Calcium dipropionate.
CAS No.: 4075-81-4
EINECS, EC Number: 223-795-8
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flammability of the Product: May be combustible at high temperature.
Products of Combustion: Fumes, Calcium Oxide Carbon dioxide & Carbon Monoxide.
Explosion: Slightly explosive on heating.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. On decomposition it may emit carbon monoxide.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray.Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not Specified.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: Colorless or white powder or crystals.
Odor: It is odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: around 3.13
Melting Point: 681C 1257F
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is soluble in water.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits carbon monoxide & fumes when heated to decomposition. It may form calcium oxide harmful gases.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: Incompatibles and moisture.
11. Toxicological Information
Toxicity data
ORL-RAT LD50 3290 mg kg-1
ORL-MAM LD50 2350 mg kg-1
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: NA
Developmental Toxicity: NA.
12. Ecological Information
Environmental Fate: Not classified as environmentally hazardous.
Environmental Toxicity: This chemical is expected to cause little oxygen depletion in aquatic systems.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMO/IMDG & IATA/ICAO: Not controlled.
15. Regulatory Information
USA:
SARA 311/312 Hazards: Not Listed.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Calcium Propionate Structure
CAS Number 4075-81-4, Calcium Propionate Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 11-dec-24
We manufacture:
Glacial Acetic Acid Manufacturer
Calcium Gluceptate or Calcium Glucoheptonate