CAS Number 41372-22-9 Hydrate, 5743-47-5 Pentahydrate, 814-80-2 Anhydrous, Calcium Lactate Hydrate Pentahydrate Anhydrous USP BP Ph Eur IP FCC Food Grade Manufacturers Exporters
------ 
CAS Number 41372-22-9 Hydrate, 5743-47-5 Pentahydrate, 814-80-2 Anhydrous, Calcium Lactate Hydrate Pentahydrate Anhydrous Manufacturer Exporter
For Properties Specifications of Calcium Lactate Hydrate Pentahydrate Anhydrous Click Properties, Specifications of Calcium Lactate Hydrate Pentahydrate Anhydrous Manufacturer.
For Uses of Calcium Lactate Click Uses of Calcium Lactate Manufacturer.
For For SDS MSDS Sheet of Calcium Lactate Click SDS Safety Data Sheet MSDS Sheet of Calcium Lactate Manufacturer.
The Properties and Specifications of Calcium Lactate:
Calcium lactate USP Grade Specifications
C6H10CaO6xH2O (anhydrous) 218.22
Propanoic acid, 2-hydroxy-, calcium salt (2:1), hydrate.
Calcium lactate (1:2) hydrate CAS 41372-22-9
Calcium lactate (1:2) pentahydrate. 308.30 CAS 5743-47-5
Anhydrous CAS 814-80-2
Calcium Lactate contains not less than 98.0 percent and not more than 101.0 percent of C6H10CaO6, calculated on the dried basis.
Identification:
A: A solution (1 in 20) responds to the tests for Calcium.
B: Infrared Absorption 197K . USP30
Acidity: Titrate 20 mL of a solution (1 in 20) with 0.10 N sodium hydroxide, using PhPh TS as the indicator: not more than 0.50 mL is required for neutralization (0.45% as lactic acid).
Loss on drying: Distribute a 1- to 2-g portion evenly in a suitable weighing dish to a depth of not more than 3 mm, and dry at 120 for 4 hours: the pentahydrate loses between 22.0% and 27.0% of its weight; the trihydrate loses between 15.0% and 20.0% of its weight; the monohydrate loses between 5.0% and 8.0% of its weight; and the dried form loses not more than 3.0% of its weight.
Volatile fatty acid: Stir about 500 mg with 1 mL of sulfuric acid, and warm: the mixture does not emit an odor of volatile fatty acid.
Heavy metals: the limit is 0.002%.
Limit of magnesium and alkali salts: Mix 1.0 g with 40 mL of water, carefully add 1 mL of hydrochloric acid, and heat the solution to boiling. Proceed as directed in the test for Magnesium and alkali salts under Calcium Carbonate, beginning with “Rapidly add 40 mL of oxalic acid TS”: the weight of the residue does not exceed 5.0 mg (1.0%).
Calcium Lactate Monohydrate BP Ph Eur Grade Specifications
C6H10CaO6,H2O --- 236.0 --- CAS 41372-22-9
DEFINITION
Calcium bis(2-hydroxypropanoate) or mixture of calcium (2R)-, (2S)- and (2RS)-2-hydroxypropanoates monohydrates.
Content: 98.0 per cent to 102.0 per cent (dried substance).
CHARACTERS
Appearance: White or almost white, crystalline or granular powder.
Solubility: Soluble in water, freely soluble in boiling water, very slightly soluble in ethanol (96 per cent).
IDENTIFICATION
A. It complies with the test for loss on drying (see Tests).
B. It gives the reaction of lactates.
C. It gives reaction of calcium.
TESTS
Solution S: Dissolve 5.4 g (equivalent to 5.0 g of the dried substance) with heating in carbon dioxide-free water prepared from distilled water, allow to cool and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension and not more intensely coloured than reference solution.
Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of PhPh solution R and 0.5 ml of 0.01 M hydrochloric acid . The solution is colourless. Not more than 2.0 ml of 0.01 M sodium hydroxide is required to change the colour of the indicator to pink.
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 400 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium sulphate solution. Allow to stand for 15 min. Any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water R and 10 ml of solution S.
Iron: Maximum 50 ppm.
Magnesium and alkali salts: Maximum 1 per cent.
Heavy metals: 10 ppm maximum.
Loss on drying: 5.0 per cent to 8.0 per cent, determined on 0.500 g by drying in an oven at 125C.
Calcium Lactate Trihydrate BP Ph Eur Grade Specifications
C6H10CaO6,3H2O --- 218.2 --- CAS 814-80-2 (anhydrous)
DEFINITION
Calcium bis(2-hydroxypropanoate) or mixture of calcium (2R)-, (2S)- and (2RS)-2-hydroxypropanoates trihydrates.
Content: 98.0 per cent to 102.0 per cent (dried substance).
CHARACTERS
Appearance: White or almost white, crystalline or granular powder.
Solubility: Soluble in water, freely soluble in boiling water, very slightly soluble in ethanol (96 per cent).
IDENTIFICATION
A. It complies with the test for loss on drying (see Tests).
B. It gives the reaction of lactates.
C. It gives reaction of calcium.
TESTS
Solution S: Dissolve 6.2 g (equivalent to 5.0 g of the dried substance) with heating in carbon dioxide-free water prepared from distilled water, allow to cool and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension and not more intensely coloured than reference solution.
Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of PhPh solution and 0.5 ml of 0.01 M hydrochloric acid . The solution is colourless. Not more than 2.0 ml of 0.01 M sodium hydroxide is required to change the colour of the indicator to pink.
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 400 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium sulphate solution. Allow to stand for 15 min. Any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 50 ppm.
Magnesium and alkali salts: Maximum 1 per cent.
Heavy metals: Maximum 10 ppm.
Loss on drying: 15.0 per cent to 20.0 per cent, determined on 0.500 g by drying in an oven at 125C.
Calcium Lactate Pentahydrate BP Ph Eur Grade Specifications
C6H10CaO6,5H2O --- 218.2 --- CAS 814-80-2 (anhydrous)
DEFINITION
Calcium bis(2-hydroxypropanoate) or mixture of calcium (2R)-, (2S)- and (2RS)-2-hydroxypropanoates pentahydrates.
Content: 98.0 per cent to 102.0 per cent (dried substance).
CHARACTERS
Appearance: White or almost white, crystalline or granular powder, slightly efflorescent.
Solubility: Soluble in water, freely soluble in boiling water, very slightly soluble in ethanol (96 per cent).
IDENTIFICATION
A. It complies with the test for loss on drying (see Tests).
B. It gives the reaction of lactates.
C. It gives reaction of calcium.
TESTS
Solution S: Dissolve 7.1 g (equivalent to 5.0 g of the dried substance) with heating in carbon dioxide-free water R prepared from distilled water R , allow to cool and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension and not more intensely coloured than reference solution.
Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of PhPh solution and 0.5 ml of 0.01 M hydrochloric acid . The solution is colourless. Not more than 2.0 ml of 0.01 M sodium hydroxide is required to change the colour of the indicator to pink.
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 400 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium sulphate solution. Allow to stand for 15 min. Any opalescence in the solution is not more intense than that in a mixture of 1 ml of distilled water and 10 ml of solution S.
Iron: Maximum 50 ppm.
Magnesium and alkali salts: Maximum 1 per cent.
Heavy metals: Maximum 10 ppm.
Loss on drying: 22.0 per cent to 27.0 per cent, determined on 0.500 g by drying in an oven at 125C.
Calcium lactate IP Grade
We also supply Calcium Lactate IP.
Calcium Lactate FCC Food Grade Specifications
2-Hydroxypropanoic Acid Calcium Salt
[CH3CH(OH)COO]2Ca-xH2O
C6H10CaO6-xH2O Formula weight, anhydrous 218.22
INS: 327 CAS 814-80-2
DESCRIPTION
Calcium Lactate occurs as a white to cream-colored, crystalline powder or granules. It contains up to five molecules of water of crystallization. The pentahydrate is somewhat efflorescent and at 120C becomes anhydrous. It is soluble in water and practically insoluble in alcohol.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Calcium and for Lactate.
Assay: Not less than 98.0% and not more than 101.0% of C6H10CaO6, calculated on the dried basis.
Acidity: Passes test (about 0.45%, as lactic acid).
Fluoride: Not more than 0.0015%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Pentahydrate: Between 22.0% and 27.0%; Trihydrate: Between 15.0% and 20.0%; Monohydrate: Between 5.0% and 8.0%; Dried Form: Not more than 3.0%.
Magnesium and Alkali Salts: Not more than 1%.
The Uses of Calcium Lactate:
Calcium lactate is a commercially produced food additive used to stabilize, thicken, flavor, firm, or leaven foods. It's also used in water treatment facilities or added to animal feed, calcium supplements, or pharmaceutical drugs. It may be used to treat conditions caused by low calcium levels such as bone loss, weak bones, etc. Calcium lactate is used in medicine, mainly to treat calcium deficiencies and as a food additive with E number of E327.
The MSDS-SDS Hazard Statement of Calcium Lactate:
Calcium Lactate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 08-Jan-23
Section 1: Chemical Product and Company Identification
Product Name & Other Names: Calcium Lactate or L-Lactic acid calcium salt or Calcium L-lactate pentahydrate.
CAS Number: 5743-47-5 or (814-80-2 anhydrous)
EINECS EC Code: 248-953-3
Chemical Formula: [CH3CH(OH)COO]2Ca-5H2O
Molecular Weight: 308.29
Relevant uses and uses advised against (if any): Laboratory chemicals, Manufacture of substances
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements NONE |
Signal Word: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Product Name & Other Names: Calcium Lactate or L-Lactic acid calcium salt or Calcium L-lactate pentahydrate.
CAS Number: 5743-47-5 or (814-80-2 anhydrous)
EINECS EC Code: 248-953-3
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Notes to Physician: Treat symptomatically.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Products of Combustion: Calcium oxide, Fumes and Oxides of carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.
Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, bases, amines, reducing agents, acids, acid anhydrides. Refrigerated storage recommended.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
Section 9: Physical and Chemical Properties
Appearance: Solid white to off-white powder or granules.
Odor: Odorless.
Odor threshold: Not available.
pH (5% soln/water): 6-8
Relative density: Not available.
Melting Point: 240C.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water.
Viscosity: Not available.
Section 10: Stability and Reactivity Data
Stability: It is stable under cool condition.
Conditions of instability: Incompatible materials
Incompatibility with various substances: Heat, light, strong oxidizing agents, bases, amines, reducing agents, acids, acid anhydrides.
Polymerization: Will not occur.
Section 11: Toxicological Information
Toxicity to Animals: Not available.
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
Section 12: Ecological Information
Ecotoxicity: The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment. Not dangerous for the ozone layer.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state, and local environmental control regulations.
Section 14: Transport Information
DOT USA: Not controlled.
ADR/RID Europe: Not controlled.
IMDG: Not controlled.
IATA: Not controlled.
Section 15: Other Regulatory Information
USA Regulations:
SARA 311/312: See section 2.
California Proposition 65: This product does not contain any Proposition 65 chemicals.
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Calcium Lactate Structure
CAS Number 41372-22-9 Hydrate, 5743-47-5 Pentahydrate, 814-80-2 Anhydrous, Calcium Lactate Hydrate Pentahydrate Anhydrous Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 16-nov-24
We manufacture:
Glacial Acetic Acid Manufacturer
Calcium Gluceptate or Calcium Glucoheptonate
Calcium Magnesium Lactate Gluconate