CAS Number 108-95-2, Phenol IP BP Ph Eur EP USP Analytical Reagent Grade Manufacturers Exporters
------ 
CAS Number 108-95-2, Phenol IP BP Ph Eur EP USP Analytical Reagent Manufacturer Exporter
For Properties Specifications of Phenol Click Properties, Specifications of Phenol Manufacturer.
For Uses of Phenol Click Uses of Phenol Manufacturer.
For For SDS MSDS Sheet of Phenol Click SDS Safety Data Sheet MSDS Sheet of Phenol Manufacturer.
The Properties and Specifications of Phenol:
Phenol BP Ph Eur Grade Specifications:
C6H6O --- 94.1 --- 108-95-2
Action and use: Antiseptic; antimicrobial preservative; antipruritic.
DEFINITION
Content: 99.0 per cent to 100.5 per cent.
CHARACTERS
Appearance: Colourless or faintly pink or faintly yellowish, crystals or crystalline masses, deliquescent.
Solubility: Soluble in water, very soluble in ethanol (96 per cent), in glycerol and in methylene chloride.
IDENTIFICATION
A. Dissolve 0.5 g in 2 mL of concentrated ammonia. The substance dissolves completely. Dilute to about 100 mL with water. To 2 mL of this solution add 0.05 mL of strong sodium hypochlorite solution. A blue colour develops and becomes progressively more intense.
B. To 1 mL of solution S add 10 mL of water and 0.1 mL of ferric chloride solution. A violet colour is produced which disappears on addition of 5 mL of 2-propanol.
C. To 1 mL of solution S add 10 mL of water and 1 mL of bromine water. A white precipitate is formed.
TESTS
Solution S: Dissolve 1.0 g in water and dilute to 15 mL with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
Acidity: To 2 mL of solution S add 0.05 mL of methyl orange solution. The solution is yellow.
Freezing point: Minimum 39.5C.
Residue on evaporation: Maximum 0.05 per cent.
Evaporate 5.000 g to dryness on a water-bath and dry at 100-105C for 1 h. The residue weighs a maximum of 2.5 mg.
Phenol USP Grade Specifications:
C6H6O --- 94.11
Phenol CAS Number 108-95-2.
DEFINITION
Phenol contains NLT 99.0% and NMT 100.5% of phenol (C6H6O), calculated on the anhydrous basis. It may contain a suitable stabilizer.
IDENTIFICATION
[Caution— Avoid contact with skin because serious burns may result.]
A.
Analysis: To a solution add bromine.
Acceptance criteria: A white precipitate is formed, and it dissolves at first but becomes permanent as more of the reagent is added.
B.
Sample solution: 1 in 100
Analysis: To 10 mL of the Sample solution add 1 drop of ferric chloride.
Acceptance criteria: A violet color is produced.
Limit of Non-volatile Residue:
Sample: 5 g
Analysis: Heat the Sample in a tared porcelain dish on a steam bath until it has evaporated and dry the residue at 105C for 1 h.
Acceptance criteria: NMT 0.05%
Clarity of Solution and Reaction:
Sample solution: 1 in 15
Acceptance criteria: The Sample solution is clear, and it is neutral or acid to litmus paper.
Congealing Temperature: NLT 39C.
Water Determination: NMT 0.5%
Packaging and Storage: Preserve in tight, light-resistant containers.
Labelling: Label it to indicate the name and amount of any substance added as a stabilizer.
We also supply Phenol or Carbolic acid or Hydroxybenzene EP IP Grade.
Phenol Analytical Reagent Grade Specifications:
C6H5OH --- Formula Weight 94.11
CAS Number 108-95-2
NOTE. Phenol that conforms to this specification may contain a stabilizer. If a stabilizer is present, its presence should be stated on the label.
REQUIREMENTS
Assay: 99% C6H5OH
Freezing point: Not below 40.5C (dry basis).
Clarity of solution: Passes test.
MAXIMUM ALLOWABLE
Residue after evaporation: 0.05%
Water: 0.5%
The Uses of Phenol:
Phenol or Carbolic acid or Benzenol or Hydroxybenzene is primarily used to synthesize plastics and related materials. Phenol and its chemical derivatives are essential for production of polycarbonates, epoxies, Bakelite, nylon, detergents, herbicides such as phenoxy herbicides, and numerous pharmaceutical drugs.
The MSDS-SDS Hazard Statement of Phenol:
Phenol or Benzenol or Carbolic acid or Benzenol or Hydroxybenzene
SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 21-Mar-21
1. Product Identification
Product Name & Other Names: Phenol or Benzenol or Carbolic acid or Benzenol or Hydroxybenzene
CAS No.: 108-95-2
EINECS EC Code: 203-632-7
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
Acute toxicity, Inhalation (Category 3), H331
Acute toxicity, Dermal (Category 3), H311
Skin corrosion (Category 1B), H314
Germ cell mutagenicity (Category 2), H341
Specific target organ toxicity - repeated exposure (Category 2), Nervous system, Kidney, Liver, Skin, H373
Long-term (chronic) aquatic hazard (Category 2), H411
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements  Toxic |
GHS Label Elements |
GHS Label Elements |
GHS Label Elements |
Signal Word: Danger
Hazard Statements:
H301+H311+H331 Toxic if swallowed, in contact with skin or if inhaled
H314 Causes severe skin burns and eye damage.
H341 Suspected of causing genetic defects.
H373 May cause damage to organs (Nervous system, Kidney, Liver, Skin) through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.
Precautionary Statements
P202: Do not handle until all safety precautions have been read and understood.
P220: Keep/Store away from clothing/other combustible materials.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P284: Wear respiratory protection.
P301+P310+330: IF SWALLOWED: Rinse mouth and immediately call a POISON CENTER or doctor/physician.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P304+P341+P311: IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P308+313: IF exposed or concerned: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/ attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Phenol or Benzenol or Carbolic acid or Benzenol or Hydroxybenzene
CAS No.: 108-95-2
EINECS EC Code: 203-632-7
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, it will cause irritation and damage to nose and throat. It can cause headache, bleeding from nose coughing and chest discomfort. Remove the victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: It will cause irritation and burns to mouth, digestive tract and stomach. It may lead to pain, nausea, vomiting, and even collapse. Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: On contact, it can cause itching, pain, swelling and redness. Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention.
Eye Contact: It can cause severe damage to eyes. Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Get medical attention.
5. Fire Fighting Measures
Fire: Flash point: 79C.
Toxic fumes, carbon dioxide, carbon monoxide may be formed in fire.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide and water spray jet. Avoid soild water jet as it can scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Mop and pick up the material and place in an appropriate waste disposal container. Soak up with inert absorbent material and dispose of as hazardous waste.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Avoid mist formation. Wear full protective equipment and ensure proper ventilation. Keep away from heat. Keep away from sources of ignition. Provide ventilation. Vacuum or sweep up and remove to an approved disposal container.
7. Handling and Storage
Precautions for safe handling: Keep away from heat and source of fire preferably in a ventilated area. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Keep locked up in tightly closed container. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Do not ingest. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like oxidizing agents, strong bases, strong acids.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
USA ACGIH TLV(TWA): 5 ppm (skin); OSHA PEL(TWA): 5 ppm (skin).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron, or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full-face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area.
9. Physical and Chemical Properties
Appearance: Transparent crystalline solid.
Odor: Sweet and tarry.
Odor threshold: No Data found.
pH: No Data found.
Relative density: about 1.07
Melting point/freezing point: 41C literature.
Initial boiling point and boiling range: 182C literature.
Flash point: 79C.
Auto-ignition temperature: No Data found.
Decomposition temperature: No Data found.
Upper/lower flammability or explosive limits: No Data found.
Vapor pressure: No Data found.
Vapor density: No Data found.
Evaporation rate: No Data found.
Flammability (solid, gas): No Data found.
Partition coefficient: n-octanol/water: No Data found.
Solubility: Appreciably soluble in water.
Viscosity: No Data found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide and toxic fumes may form when heated to decomposition.
Hazardous Polymerization: Not reported.
Incompatibilities: Strong oxidizing agents, strong bases, strong acids.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.
11. Toxicological Information
LD50 Dermal Rat: 660 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No Data found.
Mutagenic Effects: Suspected of causing genetic defects.
Developmental Toxicity: No Data found.
Reproductive Effects: No Data found.
May cause damage to organs (Nervous system, Kidney, Liver, Skin) through prolonged or repeated exposure.
12. Ecological Information
Toxicity to fish: flow-through test LC50 - Onchorhynchus clarki - 8,9 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Ceriodaphnia dubia (water flea) - 3,1 mg/l - 48 h.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No Data found.
Results of PBT and vPvB assessment: No data found for assessment.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Follow all the pollution control laws.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN Number: 1671
Proper shipping name: PHENOL, SOLID
Class: 6.1; Packing group: II.
IMDG/IMO & IATA/ICAO:
UN Number: 1671
Proper shipping name: PHENOL, SOLID
Class: 6.1; Packing group: II.
15. Regulatory Information
USA:
SARA 311/312 Hazards: See section 2.
Section 16 - Additional Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Phenol Structure
CAS Number 108-95-2, Phenol Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 19-nov-24
We manufacture: