CAS Number 122-99-6, Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol USP NF BP Ph Eur Grade Manufacturers Exporters
------ 
CAS Number 122-99-6, Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol USP NF BP Ph Eur Manufacturer Exporter
For Properties Specifications of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol Click Properties, Specifications of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol Manufacturer.
For Uses of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol Click Uses of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol Manufacturer.
For For SDS MSDS Sheet of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol Click SDS Safety Data Sheet MSDS Sheet of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol Manufacturer.
The Properties and Specifications of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol:
Specifications of Phenoxyethanol USP NF Grade:
C8H10O2 138.16
2-Phenoxyethanol;
2-Phenoxyethyl alcohol;
Ethylene glycol, 2-monophenyl ether CAS 122-99-6
DEFINITION
Phenoxyethanol contains NLT 98.0% and NMT 102.0% of phenoxyethanol (C8H10O2).
IDENTIFICATION
A. Infrared Absorption: On an undried specimen.
ASSAY
To pass the test.
Acceptance criteria: 98.0% to 102.0%
Organic Impurities: To pass the test.
Acceptance criteria: NMT 1.0%
Limit of Phenol: To pass the test.
Acceptance criteria: NMT 0.1%
Specific Gravity: 1.105 to 1.110 at 20C.
Specifications of Phenoxyethanol BP Ph Eur Grade:
C8H10O2 --- 138.2 CAS 122-99-6
Action and use: Antimicrobial preservative; also used topically in treatment of bacterial infections.
DEFINITION
2-Phenoxyethanol.
Content: 99.0 per cent m/m to 100.5 per cent m/m.
CHARACTERS
Appearance: Colourless, slightly viscous liquid.
Solubility: Slightly soluble in water, in arachis oil and in olive oil, miscible with acetone, with ethanol (96 per cent) and with glycerol.
IDENTIFICATION
First identification: C
Second identification: A, B, D
A. Refractive index: 1.537 to 1.539.
B. Ultraviolet and visible absorption spectrophotometry.
Test solution: Dissolve 80.0 mg in water and dilute to 100.0 mL with the same solvent. Dilute 10.0 mL of the solution to 100.0 mL with water.
Spectral range: 240-350 nm.
Absorption maxim: At 269 nm and 275 nm.
Specific absorbances at the absorption maxima:
- at 269 nm: 95 to 105;
- at 275 nm: 75 to 85.
C. Infrared absorption spectrophotometry.
D. Shake 2 mL with a mixture of 4 g of potassium permanganate, 5.4 g of sodium carbonate and 75 mL of water for 30 min. Add 25 g of sodium chloride and stir continuously for 60 min, filter and acidify with hydrochloric acid to about pH 1.7. The melting point of the precipitate, after recrystallisation from water is 96C to 99C.
TESTS
Relative density: 1.105 to 1.110.
Related substances: To pass the test by Gas chromatography.
Limits:
- unspecified impurities: for each impurity, maximum 0.10 per cent;
- total: maximum 0.3 per cent;
- reporting threshold: 0.05 per cent.
The Uses of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol:
Phenoxyethanol is used as a perfume fixative; an insect repellent; an antiseptic; a solvent for cellulose acetate, dyes, inks, and resins; a preservative for pharmaceuticals, cosmetics and lubricants; an anesthetic in fish aquaculture; and in organic synthesis.
The MSDS-SDS Hazard Statement of Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol:
Phenoxyethanol or Ethylene& glycol monophenyl ether or 2-Phenoxyethyl alcohol SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 04-Dec-24
1. Product Identification
Product Name & Other Names: Phenoxyethanol or Ethylene glycol monophenyl ether or 2-Phenoxyethyl alcohol.
CAS No.: 122-99-6
EINECS EC Number: 204-589-7
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, oral Category 4, H302
Serious eye damage/eye irritation Category 2A, H319
Labeling according to Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
Signal Words: Warning
Hazard statements:
H302: Harmful if swallowed.
H319: Causes serious eye irritation.
Precautionary statements:
P264: Wash --- thoroughly after handling.
P270: Do not eat, drink, or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. Composition/Information on Ingredients
Product Name & Other Names: Phenoxyethanol or Ethylene glycol monophenyl ether or 2-Phenoxyethyl alcohol.
CAS No.: 122-99-6
EINECS EC Number: 204-589-7
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flammability of the Product: Combustible at high temperature.
Auto-Ignition Temperature: 475C.
Products of Combustion: Fumes, Carbon dioxide & Carbon Monoxide.
Explosion: Explosive on heating.
Fire Extinguishing Media: Use means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Avoid solid water jet as it can scatter the fire.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Clean-up procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Small Spill: Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Large Spill: Avoid touching the spilled material. Do not let the product enter drains. Avoid breathing vapors, mist, or gas. Ensure adequate ventilation. Contain spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Keep away from heat, sun light.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not Specified.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Colorless liquid.
Odor: Mild.
Odor threshold: No data found.
pH: No data found.
Relative density: No data found.
Boiling Point: 244C to 246C literature.
Melting Point: 11C to 13C literature.
Flash point: 126C.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: It is slightly soluble in water.
Viscosity: No data found.
Molecular Weight: 138.2
Chemical Formula: C8H10O2
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits carbon monoxide & fumes when heated to decomposition. It may form harmful gases.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents.
Conditions to Avoid: Incompatible materials, light, dust/mist generation, excess heat.
11. Toxicological Information
Toxicity data
ORAL-RAT LD50 1850 mg/kg
INHALATION-Rat LC50 >1000 mg.m3.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No data found.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No No data found.
12. Ecological Information
Toxicity to fish: static test LC50 - Leuciscus idus (Golden orfe) - > 220 - < 460 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - > 500 mg/l - 48 h
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: Biodegradable.
Results of PBT and vPvB assessment: No data found for assessment.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Follow all the pollution control rules.
14. Transport Information
Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
Sea Transport IMDG/IMO: Not dangerous goods.
Air Transport ICAO/IATA: Not dangerous goods.
15. Regulatory Information
USA:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: Not listed.
16. Other Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol Structure
CAS Number 122-99-6, Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 10-dec-24
We manufacture:
Hydroxyethyl Salicylate or Glycol Salicylate
Phenoxyethanol or Ethylene Glycol Monophenyl Ether or 2-Phenoxyethyl Alcohol