CAS Number 22199-08-2, Silver Sulfadiazine USP IP Grade Manufacturers Exporters
------ 
CAS Number 22199-08-2, Silver Sulfadiazine USP IP Grade
For Properties Specifications of Silver Sulfadiazine Click Properties, Specifications of Silver Sulfadiazine Manufacturer.
For Uses of Silver Sulfadiazine Click Uses of Silver Sulfadiazine Manufacturer.
For For SDS MSDS Sheet of Silver Sulfadiazine Click SDS Safety Data Sheet MSDS Sheet of Silver Sulfadiazine Manufacturer.
The Properties and Specifications of Silver Sulfadiazine:
Specifications of Silver Sulfadiazine USP Grade:
C10H9AgN4O2S --- 357.14
Benzenesulfonamide, 4-amino-N-2-pyrimidinyl-, monosilver(1+) salt;
N 1 -2-Pyrimidinylsulfanilamide monosilver(1+) salt CAS 22199-08-2
DEFINITION
Silver Sulfadiazine contains NLT 98.0% and NMT 102.0% of silver sulfadiazine (C10H9AgN4O2S), calculated on the dried basis.
IDENTIFICATION
A. Infrared Absorption
B. The R F value of the principal spot of the Sample solution corresponds to that of Standard solution A, as obtained in the test for Organic Impurities.
C. Identification Tests: General, Silver
ASSAY
Acceptance criteria: 98.0%–102.0% on the dried basis
Content of Silver: Acceptance criteria: 29.3% to 30.5% of silver is found.
Limit of Nitrate: Acceptance criteria: NMT 0.1%
Organic Impurities: To pass the chromatographic test.
Loss on Drying: Acceptance criteria: NMT 0.5%
Particle Size: Acceptance criteria: The average particle size is NMT 10 µm, and the size of NMT 10% of the particles is greater than 40 µm.
Packaging and Storage: Preserve in well-closed, light-resistant containers.
The Uses of Silver Sulfadiazine:
Silver sulfadiazine or Silver sulphadiazine is a topical antibiotic used in burns to prevent infection. It is still widely used to protect third-degree burns.
The MSDS-SDS Hazard Statement of Silver Sulfadiazine:
Silver Sulfadiazine or Silver Sulphadiazine SDS, Safety Data Sheet
MSDS
1. Product Identification
Product Name & Other Names: Silver Sulfadiazine or Silver Sulphadiazine.
CAS No.: 22199-08-2
EINECS: EC Number: 244-834-5
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: s per letterhead above.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion/irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements Irritant |
Signal Words: Warning
Hazard statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352-IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P362: Take off contaminated clothing and wash before reuse.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition/Information on Ingredients
Product Name & Other Names: Silver Sulfadiazine or Silver Sulphadiazine.
CAS No.: 22199-08-2
EINECS: EC Number: 244-834-5
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Flammability of the Product: Combustible at elevated temperature.
Products of Combustion: Sulfur oxides, Carbon oxides, Silver oxide and fumes.
Fire Extinguishing Media: Use dry chemical, dry sand or carbon dioxide. Water and foam must be avoided.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Avoid touching the spilled material. Do not let the product enter drains. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Do not contaminate the environment.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Do not ingest. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and strong bases & acids. Avoid water and moisture.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: White Powder or Crystals.
Odor: No data found.
Odor threshold: No data found.
pH: No data found.
Relative density: Not available.
Boiling Point: Not available.
Melting Point: 285C.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: No data found.
Viscosity: No data found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits Sulfur oxides, Carbon oxides, Silver oxide and fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents and strong bases & acids.
Conditions to Avoid: Incompatibles, heat & light, moisture.
11. Toxicological Information
Toxicity data
ORL-RAT LD50: No data found.
Carcinogenic Effects: Not know as carcinogen.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.
12. Ecological Information
Environmental Toxicity: No data found.
Persistence and Degradability: No data found.
Mobility: No data found.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Dispose of container and unused contents in accordance with law.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO & IATA/ICAO: Not controlled.
15. Regulatory Information
USA:
SARA 311/312 Hazards: As per section2.
California prop. 65: Contains no chemical subject to California Prop 65.
Section 16 - Additional Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
Anmol Chemicals Industries Pvt. Ltd. is an off-shoot of Anmol Chemicals and Anmol Chemicals & Pharmaceuticals, Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals Industries Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Silver Sulfadiazine Structure
CAS Number 22199-08-2, Silver Sulfadiazine Manufacturer Exporter
ANMOL CHEMICALS INDUSTRIES Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: 91-22-65290110
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 24-may-26
We manufacture:
Hypromellose Phthalate or Hydroxypropyl Methycellulose Phthalate