CAS Number 54965-21-8, Albendazole EP BP Ph Eur USP IP Grade Manufacturers Exporters
------ 
CAS Number 54965-21-8, Albendazole EP BP Ph Eur USP IP Grade Manufacturer Exporter
For Properties Specifications of Albendazole Click Properties, Specifications of Albendazole Manufacturer.
For Uses of Albendazole Click Uses of Albendazole Manufacturer.
For For SDS MSDS Sheet of Albendazole Click SDS Safety Data Sheet MSDS Sheet of Albendazole Manufacturer.
The Properties and Specifications of Albendazole:
Albendazole USP Grade Specifications:
C12H15N3O2S --- 265.33
Carbamic acid, [5-(propylthio)-1H -benzimidazol-2-yl]-, methyl ester;
Methyl 5-(propylthio)-2-benzimidazolecarbamate CAS 54965-21-8
UNII: F4216019LN
DEFINITION
Albendazole contains NLT 98.0% and NMT 102.0% of albendazole (C12H15N3O2S), calculated on the dried basis.
IDENTIFICATION
A. Infrared Absorption.
B. The R F value of the principal spot of the Sample solution corresponds to that of the principal spot of the Standard solution, as obtained in the test for Organic Impurities.
Residue on Ignition: NMT 0.2%
Organic Impurities: To pass the test by chromatography.
Loss on Drying: Dry at 105C for 4 h. NMT 0.5%
Packaging and Storage: Preserve in tight containers, and store at controlled room temperature.
Albendazole BP Ph Eur Grade Specifications:
C12H15N3O2S --- 265.3 CAS 54965-21-8
Action and use: Benzimidazole antihelminthic.
DEFINITION
Methyl [5-(propylsulfanyl)-1H-benzimidazol-2-yl]carbamate.
Content: 98.0 per cent to 102.0 per cent (dried substance).
CHARACTERS
Appearance: White or slightly yellowish powder.
Solubility: Practically insoluble in water, freely soluble in anhydrous formic acid, very slightly soluble in methylene chloride, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
Infrared absorption spectrophotometry.
Appearance of solution: The solution is clear and not more intensely coloured than reference solution.
Related substances: To pass the test by liquid chromatography.
Loss on drying: Maximum 0.5 per cent, determined on 1.000 g by drying in an oven at 105C for 4 h.
Sulfated ash: Maximum 0.2 per cent, determined on 1.0 g.
Storage: Protected from light.
We offer Albendazole BP Ph Eur IP EP USP Grade.
The Uses of Albendazole:
Albendazole is used for the treatment of a variety of intestinal parasite infections. Albendazole is mainly used in cattle and sheep, but has found some use in cats, dogs, ratite birds, goats and pigs.The MSDS-SDS Hazard Statement of Albendazole:
Albendazole SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 04-Nov-24
Section 1: Product and Company Identification
Product Name & Other Names: Albendazole.
CAS No.: 54965-21-8
EINECS, EC Number: 259-414-7
Relevant uses and uses advised against (if any): Laboratory chemicals, Manufacture of substances
Supplier: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Eye irritation (Category 2), H319
Reproductive toxicity, (Category 2) H361d
Specific target organ toxicity - repeated exposure (Category 2), H373
Chronic aquatic toxicity (Category 1), H410
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
GHS Label Elements |
GHS Label Elements |
Signal Words: Danger
Hazard statements:
H319: Causes serious eye irritation.
H361d: Suspected of damaging the unborn child.
H373: May causes damage to organs through prolonged or repeated exposure.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Section 3: Composition / Information on Ingredients
Product Name & Other Names: Albendazole.
CAS No.: 54965-21-8
EINECS, EC Number: 259-414-7
Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eyes: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally.
Skin: Immediately flush skin with excess water for 15 minutes while removing contaminated clothing.
Ingestion: Call Emergency Medical immediately. Rinse mouth with cold water. Give the victim 1-2 cups of water or milk to drink. Induce vomiting immediately.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration.
Section 5: Fire Fighting Measures
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Avoid solid water jet as it can scatter fire.
Protective equipment and precautions for firefighters: Use water spray, foam, or dry chemical to extinguish fire. Firefighters should wear full firefighting turn-out gear and respiratory protection. Cool container with water spray.
Special hazards arising from the substance: Carbon oxides, Nitrogen oxides (NOx), Sulfur compounds, Fumes.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.
Section 7: Handling and Storage Green
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Storage: Room Temperature..
Section 8: Exposure Controls / Personal Protection
Exposure guidelines: Not Available.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
Section 9: Physical and Chemical Properties
Physical state and appearance: White to almost white powder or crystals.
Odor: No data found.
Odor threshold: No data found.
pH (1% soln/water): No data found.
Relative density: Not available.
Melting Point: 208C to 210C literature.
Initial boiling point and boiling range: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Insoluble in water for all practical purpose.
Viscosity: No data found.
Section 10: Stability and Reactivity
Stability: Stable under normal conditions of use and storage.
Incompatibility: Heat, light, and strong oxidizing agents.
Hazardous Decomposition Products: Carbon oxides, Nitrogen oxides, Sulfur compounds, Toxic Fumes.
Hazardous Polymerization: Has not been reported.
Section 11: Toxicology Information
LD50 Oral Rat: 1320 mg/kg.
LD50 Oral Mouse: 3000 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.
May causes damage to organs (Kidney) through prolonged or repeated exposure.
Reproductive Effects: Suspected of damaging the unborn child.
Developmental Effects: No data found.
Teratogenicity: No data found.
Inhalation: May cause damage to organs through prolonged or repeated exposure.
Section 12: Ecological Information
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 0,024 mg/l - 48 h.
Results of PBT and vPvB assessment: This substance/mixtureis not considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Section 13: Disposal Considerations
Check with all applicable local, regional, and national laws and regulations. Follow all chemical disposal guide lines.
Section 14: Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN-No: UN3077
Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (Albendazole).
Hazard Class: 9; Packing Group: III.
IATA & IMDG/IMO
UN-No: UN3077
Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (Albendazole).
Hazard Class: 9; Packing Group: III.
Section 15: Regulatory Information
USA:
SARA 311/312 Hazard Categories: See section 2.
Section 16: Other Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Albendazole Structure
CAS Number 54965-21-8,Albendazole Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA
e-mail: info(At the rate i.e. @)anmol.org
Copyright. 11-dec-24
We manufacture: