CAS Number 112529-15-4, Pioglitazone Hydrochloride or Pioglitazone HCl IP BP Ph Eur JP EP USP Grade Manufacturers Exporters

Home ------ Contact Anmol Chemicals Industries

Chemical Exporter Air Cargo JarPacked Chemicals Pail for Chemicals Carboys Jumbo packing

Pioglitazone Hydrochloride or Pioglitazone HCl Manufacturers Exporters
CAS Number 112529-15-4, Pioglitazone Hydrochloride or Pioglitazone HCl IP BP Ph Eur JP EP USP Manufacturer Exporter

For Properties Specifications of Pioglitazone Hydrochloride or Pioglitazone HCl Click Properties, Specifications of Pioglitazone Hydrochloride Manufacturer.

For Uses of Pioglitazone Hydrochloride or Pioglitazone HCl Click Uses of Pioglitazone Hydrochloride Manufacturer.

For For SDS MSDS Sheet of Pioglitazone Hydrochloride or Pioglitazone HCl Click SDS Safety Data Sheet MSDS Sheet of Pioglitazone Hydrochloride or Pioglitazone HCl Manufacturer.

The Properties and Specifications of Pioglitazone Hydrochloride or Pioglitazone HCl:

Pioglitazone Hydrochloride BP Ph Eur Grade:
C19H21ClN2O3S --- 392.9 CAS 112529-15-4
Action and use: Peroxisome proliferator-activated receptor (PPAR)-gamma agonist; treatment of diabetes mellitus.
Content: 98.0 per cent to 102.0 per cent (anhydrous substance).

CHARACTERS
Appearance: White or almost white crystals or crystalline powder.
Solubility: Practically insoluble in water, slightly soluble to soluble in methanol, very slightly soluble in methylene chloride.

IDENTIFICATION
A
. Infrared absorption spectrophotometry.
B. Dissolve 25 mg in 0.5 mL of nitric acid and add 2 mL of dilute nitric acid. The solution gives a reaction of chlorides.
TESTS
Specific optical rotation: -0.2 to + 0.2.
Related substances: To pass the test by Liquid chromatography.
Water: Maximum 0.5 per cent, determined on 0.500 g.
Sulfated ash: Maximum 0.1 per cent, determined on 1.0 g.

Pioglitazone Hydrochloride USP Grade Specifications:
C19H20N2O3S-HCl --- 392.90
2,4-Thiazolidinedione, 5-[[4-[2-(5-ethyl-2-pyridinyl)ethoxy]phenyl]methyl]-, monohydrochloride, (±)-;
(±)-5-[p-[2-(5-Ethyl-2-pyridyl)ethoxy]benzyl]-2,4-thiazolidinedione monohydrochloride
CAS 112529-15-4
UNII: JQT35NPK6C
UNII: X4OV71U42S

DEFINITION
Pioglitazone Hydrochloride contains NLT 98.0% and NMT 102.0% of C19H20N2O3S-HCl, calculated on the anhydrous basis.

IDENTIFICATION
A
. Infrared Absorption
B. Identification Tests–General, Chloride.
C. The retention time of the pioglitazone peak of the Sample solution corresponds to that of the Standard solution, as obtained in the Assay.
Residue on Ignition: NMT 0.1%
Organic Impurities: To pass the test by chromatography.
Water Determination: NMT 0.5%
Packaging and Storage: Preserve in well-closed containers, and store at room temperature.



We also supply Pioglitazone Hydrochloride or Pioglitazone HCl JP IP Grade.


The Uses of Pioglitazone Hydrochloride or Pioglitazone HCl:

Pioglitazone helps to control your blood sugar levels by helping your body make better use of the insulin it produces. Pioglitazone is commonly used to help lower the blood sugar levels in people with type 2 diabetes.


The MSDS-SDS Hazard Statement of Pioglitazone Hydrochloride or Pioglitazone HCl:

Pioglitazone Hydrochloride or Pioglitazone HCl SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
 15-Nov-24

1. PRODUCT DESCRIPTION

Product Name & Other Names: Pioglitazone Hydrochloride or Pioglitazone HCl.
CAS Number: 112529-15-4
EINECS EC Number: 629-731-9
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. HAZARD IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
None

Signal Words: None

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

3. COMPOSITION/INFORMATION ON INGREDIENTS

Product Name & Other Names: Pioglitazone Hydrochloride or Pioglitazone HCl.
CAS Number: 112529-15-4
EINECS EC Number: 629-731-9

4. FIRST AID MEASURES

Always get medical attention after the first aid is over.

Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If swallowed, if conscious, give plenty of water. Immediately call a physician.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Keep a person warm, quiet, and get medical attention.

5. FIREFIGHTING PROCEDURES

Extinguisher Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Avoid solid water jet as it can scatter the fire.
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: Heated to decomposition, however, toxic oxides of sulfur, chlorine compounds, oxides of nitrogen and oxides of carbon along with fumes may be evolved.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. SPILL OR LEAK PROCEDURES

Personal precautions, protective equipment, and emergency procedures: Ventilate area of spill. Avoid creating dust. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.

7. SPECIAL PRECAUTIONS

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Provide appropriate exhaust ventilation at places where dust is formed. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like Strong oxidizing agents. Storage: Store at room temperature in a cool, dry place, away from heat or direct sunlight.

8. SPECIAL PROTECTION INFORMATION

Exposure limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. PHYSICAL DATA

Physical State: White to almost white powder or crystals.
Odor: No data found.
Odor threshold: No data found.
pH: No data found.
Relative density: No data found.
Melting Point: 191C literature.
Initial boiling point and boiling range: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility in Water: Soluble in DMSO.
Viscosity: No data found.

10. REACTIVITY DATA

Stability: Stable under recommended condition of storage.
Conditions to Avoid: Dust generation, Incompatibles
Incompatibility (Materials to Avoid): Strong oxidizing agents.
Hazardous Decomposition Products: Oxides of sulfur, chlorine compounds, nitrogen, and carbon along with fumes.
Hazardous Polymerization: Will not occur

11. TOXICITY DATA

Toxicity Data: No data found.
Carcinogenicity: Not listed as carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.

12. ECOLOGICAL DATA

Toxicity to fish, daphnia, and other aquatic invertebrates: No data found.
Persistence and Degradability: No data found.
Mobility: No data found.
Results of PBT and vPvB assessment: No data found for assessment.

13. DISPOSAL INFORMATION

Waste Disposal Methods: Dispose in accordance with all applicable regulations.

14. TRANSPORT INFORMATION

DOT (USA) & ADT/RID Europe: Not regulated.
IMDG & IATA: Not regulated.

15. REGULATORY INFORMATION

USA Regulations:
SARA 311/312 Hazard Categories: See section 2.

16. ADDITIONAL INFORMATION

DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals must exercise their judgment in determining its appropriateness for a particular purpose.

Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.

Pioglitazone Hydrochloride or Pioglitazone HCl Suppliers
Pioglitazone Hydrochloride or Pioglitazone HCl Structure

CAS Number 112529-15-4, Pioglitazone Hydrochloride or Pioglitazone HCl Manufacturer Exporter

ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIA

e-mail: info(At the rate i.e. @)anmol.org

Copyright. 11-dec-24

We manufacture:

Butylated Hydroxyanisole

Butylated Hydroxytoluene

Buclizine Hydrochloride

Calcium Glucoheptonate

Chlorhexidine Hydrochloride or Chlorhexidine Dihydrochloride or Chlorhexidine

Esmolol Hydrochloride or Esmolol HCl

Fexofenadine HCl or Fexofenadine Hydrochloride

Fingolimod Hydrochloride or Fingolimod HCl

Hydrochloric Acid, HCl

Nebivolol Hydrochloride or Nebivolol HCl

Paroxetine HCl or Paroxetine Hydrochloride

Phenazopyridine Hydrochloride or Phenazopyridine HCl

Pioglitazone Hydrochloride or Pioglitazone HCl

Tamsulosin Hydrochloride or Tamsulosin HCl

Venlafaxine Hydrochloride.