CAS Number 1322-14-1, Calcium Undecylenate or Calcium Undecenoate USP Grade Manufacturers Exporters
CAS Number 1322-14-1, Calcium Undecylenate or Calcium Undecenoate Manufacturer ExporterFor Properties Specifications of Calcium Undecylenate or Calcium Undecenoate Click Properties, Specifications of Calcium Undecylenate or Calcium Undecenoate Manufacturer.
For Uses of Calcium Undecylenate or Calcium Undecenoate Click Uses of Calcium Undecylenate or Calcium Undecenoate Manufacturer.
For For SDS MSDS Sheet of Calcium Undecylenate or Calcium Undecenoate Click SDS Safety Data Sheet MSDS Sheet of Calcium Undecylenate or Calcium Undecenoate Manufacturer.
The Properties and Specifications of Calcium Undecylenate or Calcium Undecenoate:
Calcium Undecylenate USP Grade Specifications
C22H38O4Ca -- 406.61
10-Undecenoic acid, calcium (2+) salt.
Calcium 10-undecenoate.Calcium Undecylenate contains not less than 98.0 percent and not more than 102.0 percent of C22H38O4Ca (calcium undecylenate), calculated on the dried basis.
Identification
A: A filtered solution (1 in 20) in 3 N hydrochloric acid responds to the tests for Calcium.
B: Transfer 40 mL of water and 10 g of calcium undecylenate to a 250-mL separator. Cautiously and slowly add 10 mL of hydrochloric acid, while swirling. Insert the stopper, and shake. [NOTE: The separator will become quite warm, and pressure must be carefully and frequently relieved through the stopcock. If a curdy, white material remains after 5 minutes of shaking, add additional hydrochloric acid, 1 mL at a time, and shake until a clear oily phase is formed.] Allow the phases to separate, drain, and discard the bottom aqueous layer. Drain and discard the middle oily layer, if present. Filter the top layer of undecylenic acid through a pledget of cotton into a 10-mL graduated cylinder, noting the volume obtained. Transfer the filtrate to a 250-mL flask, and add an equal volume of aniline. Reflux for 1 hour, swirling the flask occasionally. Allow to cool, and pour 60 mL of alcohol through the condenser into the flask. Remove the flask from the condenser, add 1 g of charcoal, and stir. Filter the slurry into a 250-mL beaker. Add water drop-wise until a few crystals form or the solution becomes slightly cloudy. [NOTE: If too much water is added, an oil will form. Add alcohol dropwise until the oil dissolves.] Allow the mixture to stand or refrigerate until crystals are formed. Collect the crystals on a filter paper inserted in a 45-mm porous glass filter funnel. Wash the crystals with 75 mL of 25% alcohol: the crystals have a clean, white, glossy appearance. If not, re-crystallize by dissolving the crystals in about 50 mL of alcohol. Add about 1 g of charcoal, stir, filter into a 150-mL beaker, and continue as directed above, beginning with “Add water dropwise.” Dry the crystals in vacuum at 50C for 2 hours: the crystals so obtained melt between 66 and 67.5. [NOTE: If the melting point is low, additional drying or recrystallization may be necessary.]Loss on drying: Dry it at 105 for 2 hours: it loses between 2.0% and 5.7% of its weight.
Particle size, Method: Test in accordance with this procedure, except to use not more than 25 g, and except that a single No. 100 sieve is used and is to be shaken for not less than 30 minutes or until sifting is practically complete: not less than 99.0% of it passes through a No. 100 sieve.
Limit of free undecylenic acid: Transfer 10 g of Calcium Undecylenate, accurately weighed, to a 400-mL beaker, add 250 mL of solvent hexane, and mix for 2 hours using a magnetic stirrer. Filter into a 500-mL flask, evaporate with the aid of a current of air to about 20 mL, and add 100 mL of neutralized alcohol. Add 3 drops of phph TS, and titrate with 0.1 N sodium hydroxide. Each mL of 0.1 N sodium hydroxide is equivalent to 18.43 mg of C11H20O2: not more than 0.1% is found.
The Uses of Calcium Undecylenate or Calcium Undecenoate:
Calcium Undecylenate is a very economical anti-fungal agent and is used as an active ingredient in many topical over the counter anti-fungal preparations. Undecylenic Acid and its Calcium salts also help to cleanse the skin or to prevent odor by destroying or inhibiting the growth of microorganisms and prevent powdered or granular substances from forming clumps.
The MSDS-SDS Hazard Statement of Calcium Undecylenate or Calcium Undecenoate:
Calcium Undecylenate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 09-Jan-23Section 1: Chemical Product and Identification
Product Name & Other Names: Calcium Undecylenate or 10-Undecenoic acid, calcium (2+) salt
CAS#: 1322-14-1
EINECS EC-No.: 215-331-8
Molecular Weight: 406.61
Chemical Formula: C22H38CaO4
Relevant uses and uses advised against (if any): Laboratory and Industrial Manufacturing.Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
NONESignal Word: None
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.Section 3: Composition and Information on Ingredients
Product Name & Other Names: Calcium Undecylenate or 10-Undecenoic acid, calcium (2+) salt
CAS#: 1322-14-1
EINECS EC-No.: 215-331-8Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Thoroughly clean shoes and clothes before reuse. Get medical attention.
Inhalation: If Calcium Undecylenate is inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately.Section 5: Fire and Explosion Data
Flammability of the Product: Not a fire hazard. It can be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Products of Combustion: Some metallic oxides CO CO2 and fumes.
Fire Hazards in Presence of Various Substances: Slightly flammable in presence of heat.
Fire Fighting Media and Instructions:
Small Fire: Use DRY chemical powder.
Large Fire: Use water spray, fog, or foam. Avoid water jet.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.Section 7: Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.Section 8: Exposure Controls/Personal Protection
Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.Section 9: Physical and Chemical Properties
Appearance: Solid
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.Section 10: Stability and Reactivity Data
Stability: It is stable.
Conditions of Instability: Excessive heat, dust generation
Incompatibility with various substances: Oxidizing Agents, heat and sunlight.
Special Remarks on Reactivity: Decomposes on heating.
Hazardous decomposition products formed under fire conditions: Carbon oxides, Calcium oxide.
Polymerization: Will not occur.Section 11: Toxicological Information
Toxicity to Animals: Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Environmental Toxicity: Not available.Section 12: Ecological Information
Toxicity Data: Not available.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance legal regulations.
Section 14: Transport Information
DOT USA: Not controlled.
ADR/RID Europe: Not controlled.
TDG/IMDG: Not controlled.
IATA: Not controlled.Section 15: Other Regulatory Information
USA:
Section 16 - Additional Information
California Proposition 65: Not listed.DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is an off-shoot of Anmol Chemicals Taloja. It is located in MIDC Taloja and it is manufacturing pharmaceutical grades of API, Excepients, Food grade and Reagent grade chemicals. Anmol Chemicals & Pharmaceuticals Pvt. Ltd. is a several decades old group of companies, engaged in manufacturing, supplying, distributing, wholesale supplies for actual users, retail or small pack supplies for research and development chemicals, fine and speciality chemicals, pharmaceutical excipients, mineral fortifiers in chemically pure, Analytical reagent grade, IP BP USP Ph Eur EP JP and other pharmaceutical grade monograph including FCC Food grade chemicals and Nutraceuticals, Mineral Fortifiers at best prices.
Calcium Undecylenate or Calcium Undecenoate StructureCAS Number 1322-14-1, Calcium Undecylenate or Calcium Undecenoate Manufacturer Exporter
ANMOL CHEMICALS & PHARMACEUTICALS Pvt. Ltd.
India, USA, Europe, UAE
TELEPHONE: +912223770100
Navi Mumbai, INDIAe-mail: info(At the rate i.e. @)anmol.org
Copyright. 16-nov-24
We manufacture: